Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterDoor Replacement in Malibu: What It Actually Costs and How the Job Works
A standard exterior door replacement in Malibu runs $1,800 to $5,600 installed, while interior door replacement typically lands between $350 and $950 per door depending on slab versus pre-hung and whether the jamb needs work. Most Malibu jobs take one to two days on site once the door arrives, which usually means two to four weeks from signed quote to finished install. Sean Mackey and the team at Juniper Windows & Doors scope every Malibu job against two things most coastal contractors gloss over: the condition of the existing frame and whether the door has to meet wildland-urban interface or coastal-zone code. Call (682) 281-2168 for a written quote before anything gets ordered.
How We Price and Scope Door Replacement in Malibu
Malibu is not one housing market. It is 1950s canyon cottages off Malibu Canyon Road, 1970s ranch houses in Big Rock, and post-1990 rebuilds along Pacific Coast Highway and in Point Dume, and the door that makes sense for one of those houses may be completely wrong for another. A like-for-like slab swap in a bedroom hallway is a simple half-day job. An exterior entry door on a beachfront lot in the coastal zone may need impact-rated glazing, stainless fasteners, a rot-repaired jamb, and a permit with a passed inspection before we call it done. That is not an upsell. It is what Malibu’s terrain and building stock actually require.
We quote every job the same way regardless of which part of Malibu you live in. The written price covers the door, the frame work, the hardware, the labor, and the disposal of the old unit. If the job changes because the opening is worse than expected once the old door comes out, you see the revised number in writing before we proceed, not after. That is the Juniper standard, and it applies to every Malibu project we take on. See our full Door Replacement process for the step-by-step.
Most Malibu homes sit inside the wildland-urban interface, and many lots along the coast fall inside the California Coastal Commission’s jurisdiction. That means a door that would be an easy swap in Thousand Oaks can require fire-rated components and corrosion-resistant hardware in Malibu. The differences are specific and enforceable. We handle the permit path for you, which matters because a failed coastal-zone inspection means redoing work you already paid for.
Key Takeaways for Malibu Homeowners
- Exterior door replacement in Malibu typically runs $1,800 to $5,600 installed, with impact-rated and fire-rated units at the higher end.
- Interior door replacement runs $350 to $950 per door for most Malibu homes, depending on pre-hung versus slab and jamb condition.
- Coastal-zone and wildland-urban interface code requirements can change the spec, the price, and the permit path.
- Every Malibu quote from Juniper is a written, line-item price before any work starts, backed by the 365-Day Done Right Promise.
Interior Door Replacement in Malibu
Interior Door Replacement in Malibu usually means pulling an old, binding door out of an opening that has shifted with the hillside and swapping in a new pre-hung unit that actually closes without a shoulder shove. Malibu’s mix of aging canyon homes and newer coastal rebuilds means the frames are often the real problem: settling, moisture, and decades of seasonal movement leave jambs out of square. Replacing the door without fixing the opening just moves the problem to a new door.
For a typical Malibu interior door, budget $350 to $950 per door, with hollow-core slab swaps at the lower end and solid-core pre-hung doors with new casing at the upper end. A hallway with six doors in Point Dume rarely costs six times $950; we price multi-door interior replacements as a package, and the written quote reflects that.
Slab vs. Pre-Hung in Malibu
A slab replacement keeps your existing jamb and casing. It only makes sense when the frame is square, solid, and undamaged. A pre-hung replacement includes a new jamb, new casing, and fresh insulation around the opening. If your current door rubs at the top corner, stick with pre-hung. You will feel the difference every time you close it.
Solid Core for Canyon Homes
Many Malibu Canyon homeowners upgrade to solid-core interior doors for sound control, because a hollow-core door does almost nothing between a bedroom and a living room where the family gathers. Solid core also resists warping better than hollow-core in the humidity swings between canyon mornings and Santa Ana afternoons.
Interior Door Installation in Malibu
Interior Door Installation in Malibu is the full package: we measure the existing opening, order the door to spec, and install it with the frame, hinges, hardware, and casing done in one visit. When you buy a door from a big-box store and hire a handyperson to hang it, you are often buying two separate problems: a door that was never sized for a Malibu house’s out-of-square opening and an install that leaves gaps you notice every winter when the air moves.
Most interior door installations in Malibu run on the same $350 to $950 per door range as replacements, since the labor and material overlap heavily. The main cost driver is whether we are working in a freshly framed opening in a remodel, which is faster, or retrofitting into a 1960s opening that has settled half an inch out of plumb, which takes shimming, trimming, and patience.
New Construction and Remodel Openings
On Malibu remodels and additions, we install interior doors after the drywall is up and the floors are in. That sequencing prevents door bottom gaps from being set wrong before finish flooring. If your general contractor is running the project, we coordinate directly with them so the door schedule does not become the thing that delays your move-in date.
Retrofit Installation in Older Homes
Retrofitting interior doors into older Malibu homes, especially 1950s canyon cottages, often means cutting doors down or adding jamb extensions, because the wall thicknesses were never a standard number. We have done enough of these to know what works in a Malibu old-growth stud wall versus a modern 2×6. The written quote includes any trim and casing adjustments so there is no surprise line item at the end.
Trusted Brands We Service in Malibu
We stock and install doors from CGI, CWS, and Therma-Tru, three brands that hold up under what Malibu throws at a door. CGI and CWS build impact-rated and high-wind-rated doors that make sense on beachfront and bluff lots. Therma-Tru builds fiberglass entry doors that will not swell or rot the way wood does after a few years of salt air. Because our crews serve Malibu weekly, we keep common hardware, thresholds, and weather seals for these brands in local stock, which shortens the wait when a storm or a failed latch creates an urgent replacement. If you are not sure which brand fits your opening and your budget, we will tell you straight, because the right door is the one that lasts on your specific lot.
Common Door Replacement Problems We See in Malibu Homes
- Salt-air corrosion on hinges and thresholds. A steel hinge on a beachfront home in Malibu can seize within two years if it is not marine-grade. We specify stainless or coated hardware on any door within a quarter mile of the surf.
- Swollen or rotted wood jambs. Ocean moisture and canyon damp both attack wood frames. A door that sticks in summer and swings free in winter usually has a frame problem, not a slab problem.
- Doors with inland-grade glazing in impact zones. Standard glass in a wind-borne debris zone fails inspection and fails in a storm. Malibu coastal homes need impact-rated or laminated glass as code requires.
- Out-of-square openings from hillside settling. Canyon homes move. We see door openings that are half an inch out of square, and a new slab alone will never seal or latch correctly in that opening.
Pricing for Door Replacement in Malibu, CA
For exterior entry doors in Malibu, expect $1,800 to $5,600 installed. Fiberglass Therma-Tru units with standard glazing start near the bottom of that range; impact-rated CGI or CWS doors with laminated glass and stainless hardware land near the top. Interior doors run $350 to $950 per door. The biggest cost drivers in Malibu specifically are frame repair, required fire or impact ratings, and whether the job is in the coastal zone, which can add permit review time and stricter hardware and glazing requirements. We give every Malibu homeowner a written, line-item quote before any work starts, so the number you approve is the number you pay unless the opening reveals something we all agree needs addressing. Estimates are free. Call (682) 281-2168.
We Also Serve Cities Near Malibu
Beyond Malibu, our crews handle door replacement in Door Replacement in Malibu and the surrounding communities: Agoura Hills, Westlake Village, Thousand Oaks, and Calabasas. If you are in one of those areas and want a written price before any work starts, call us at (682) 281-2168.
Serving Malibu, CA - Our Local Coverage Area
We’re based in the Malibu area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Malibu
Yes, in most cases. Exterior door replacement in the City of Malibu typically requires a permit when the opening size changes or when the door is in the coastal zone or wildland-urban interface, where fire and impact ratings are reviewed. Like-for-like swaps in standard openings may not require one, but we confirm with the City before we quote so the permit path is part of the written price. Call (682) 281-2168 and we will check your specific lot.
Most Malibu door replacements take one to two days on site once the door is in hand. The full timeline from quote to finished install is usually two to four weeks, because custom and impact-rated doors are built to order and have real lead times. We give you a delivery window and a firm install date in writing.
Frame condition. If the jamb is rotted, out of square, or undersized for the code upgrades the new door requires, the job becomes a re-frame rather than a swap, and that adds real material and labor. Impact-rated glazing and coastal-zone hardware are the next biggest drivers. The door slab itself is rarely the most expensive part of the job.
Sometimes, but only if the frame is square, solid, and code-compliant for the new door. On Malibu beachfront homes, the answer is often no, because the old frame is salt-damaged or not rated for the impact door you are installing. We will inspect the opening and tell you honestly whether a slab swap makes sense or whether a pre-hung replacement protects your investment better.
We service and install CGI, CWS, and Therma-Tru doors in Malibu, and we can work on most existing brands for hardware and weather-seal upgrades. If your current door is an off-brand or a discontinued model, we will tell you whether repairing it makes financial sense or whether replacement is the smarter call. Replacement recommendations come with written pricing, never a vague estimate.
Get a Written Price for Door Replacement in Malibu
If you live in Malibu and your door sticks, leaks, corrodes, or simply looks done, call (682) 281-2168. Sean Mackey and the Juniper team will scope your opening, walk you through what the job actually requires, and hand you a written price before you commit to anything. No four-hour windows. No quote that changes at the door. Just a real number, a real schedule, and the 365-Day Done Right Promise in writing.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Malibu and the surrounding coastal communities.