Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Replacement Across Placentia
Door replacement in Placentia typically runs $450 to $2,800 depending on whether you’re swapping an interior slab or replacing an exterior unit with a new frame, flashing, and weather sealing. Most interior jobs finish in a day; exterior replacements with jamb work usually take two. We’re Juniper Windows & Doors, part of the Relay Home Co. family since 2001, and we’ve replaced doors in neighborhoods from Bradford Park to Alta Vista. Call (682) 281-2168 for a written price before anything starts.
Placentia’s housing stock is specific. A lot of the tract homes built between the 1950s and 1980s have door openings that were framed to older standards, which means the job often involves more than popping a prehung unit into place. If you’re on the fence about whether your rough opening will accept today’s stock sizes, we’ll measure it, tell you straight, and give you a number in writing.
Why Juniper Windows & Doors Is Placentia’s Preferred Door Replacement Company
Placentia homeowners use us for a simple reason: we scope the job honestly and the price doesn’t move once it’s written. Every project, from a hollow-core interior swap in a Bradrick Lane condo to a fiberglass entry replacement near Tri-City Park, gets a written line-item price before a single screw turns. The Door Replacement team that shows up is background-checked, uniformed, and working under the Relay Visibility Guarantee. You’ll get a live arrival time you can track and before-and-after photos of the work.
Sean Mackey leads our crew, and the standard he sets is direct: if the work isn’t right, we make it right. That’s the 365-Day Done Right Promise, covering parts and labor in writing for a full year after installation. Our phone line is answered by a real person 24/7, so when you call about a door that’s binding or a frame that’s rotting out, you’re not leaving a voicemail into the void.
We know Placentia’s homes because we’ve worked in them. The mid-century tracts off Yorba Linda Boulevard, the older downtown properties near Bradford Avenue, the newer builds up toward Brea’s edge. Each era has its own door framing quirks, which matters when you’re deciding between a slab swap and a full jamb replacement. Dispatch and scheduling are coordinated from our Los Angeles office; crews serve Placentia locally.
Interior Door Replacement in Placentia
Interior Door Replacement in Placentia usually means removing an existing door slab from its frame and installing a new one that fits the opening, whether that’s a dated hollow-core in a Bradford Park hallway or a warped solid-core door in an older home near the Placentia Town Center. A straightforward slab swap on a standard opening typically runs $150 to $450 per door. If the jamb is out of square, which we see often in Placentia’s 1960s and 70s tract homes, expect some planing and hinge adjustment to make the new slab close cleanly.
When a Slab Swap Makes Sense
Your frame is solid but the door itself is beat up, scratched, or simply ugly. In that case, replacing the slab is cheaper and faster than ripping out the jamb. We match the hinge locations, mortise the new slab, and set it so it swings true. For most Placentia homes with standard 2×4 framing, this is a same-day job.
When the Jamb Goes Too
If water damage, termite activity, or years of slamming have compromised the frame, replacing only the slab is a waste of money. The new door will bind or gap within months. We’ll quote the full jamb replacement honestly, with the lumber, shims, casing, and labor broken out line by line. Interior jamb replacements in Placentia run $350 to $900 on average.
Interior Door Installation in Placentia
Interior Door Installation in Placentia covers new openings and prehung units: hallway doors, bedroom doors, closet doors, pantry doors. If you’re finishing a garage conversion near Brookhaven, adding a door to a master suite in a 1980s two-story, or closing off a hallway off Kraemer Boulevard, we frame the rough opening, set the prehung unit, and trim it out. Installed cost for a standard interior prehung door in Placentia runs $400 to $900 including hardware and casing. Custom sizes or moving a rough opening add to that.
Prehung Units for New Openings
When there’s no existing frame, a prehung door makes the most sense. The slab comes mounted in a primed jamb that we shim, level, and secure. For Placentia homes with drywall already in place, we cut the opening clean, install the header, and set the unit so it stays true through seasonal humidity swings.
Hardware and Latch Prep
Boring the slab for a knob or lever, mortising for the latch plate, and adjusting the strike so the door doesn’t rattle, all of it is part of the install. We also check reveal gaps around the slab. In older Placentia homes, reveals are often uneven, and a door that brushes the jamb at the top will stick as soon as summer humidity rises.
Trusted Brands We Service in Placentia
We install and service doors from Therma-Tru, CGI, and ViewLux, among others. Placentia homeowners choose Therma-Tru fiberglass for exterior entries because it handles direct sun and winter rain without warping the way wood does. CGI and ViewLux give us solid impact-rated options for properties where wind-borne debris is a concern. Because we stock local inventory and order directly, turnaround on a Placentia project is usually faster than big-box special-order lead times.
Common Door Replacement Problems We See in Placentia Homes
- Out-of-square rough openings in mid-century tract homes. Framing settles over 50 or 60 years, and a prehung door that should drop in cleanly ends up binding at the top corner or showing a half-inch gap at the jamb. We correct this with jamb planing, shims, and resetting the hinge side before setting the new unit.
- Failed flashing and sill pans on exterior doors. Placentia gets meaningful winter rain, and an improperly flashed entry door lets water wick into the subfloor. By the time a homeowner notices soft flooring near the threshold, the framing underneath is already compromised. We replace the rotted sections and install proper sill pans and flashing every time.
- Solid-core doors swelling in summer humidity. Placentia’s inland heat and seasonal humidity swings cause solid wood slabs to absorb moisture and stick against the jamb. The fix is often re-planing the slab edge and resealing, not replacing the door, but if the warp is permanent, a new slab is the right call.
- Exterior door replacements done without permits. Any time the rough opening changes size, Placentia requires a building permit. We’ve seen failed inspections force homeowners to rip out and redo work that wasn’t permitted the first time. We pull permits on every exterior replacement that needs one and get the inspection passed before we call the job done.
Pricing for Door Replacement in Placentia, CA
Here’s what Placentia homeowners can expect, in real dollars:
- Interior slab replacement: $150 to $450 per door
- Interior prehung install (standard opening): $400 to $900 per door
- Interior jamb replacement: $350 to $900 (including lumber, shims, and casing)
- Exterior fiberglass entry door (Therma-Tru class, existing opening): $1,800 to $4,500 installed
- Exterior door with full frame replacement, new flashing, sill pan: $2,500 to $6,000+ depending on trim, sidelights, and glazing
- Rough opening modification (moving or resizing): $300 to $1,200 additional
The two biggest cost drivers in Placentia are jamb condition and rough opening size. A door that fits today’s stock dimensions is a straightforward job. A 1960s opening that’s out of square by half an inch needs skilled labor to correct. We give you the number before work starts, and because the price is written, it doesn’t change once we’re on site. Call (682) 281-2168 for a free estimate at your Placentia home.
We Also Serve Cities Near Placentia
Our crews serve Door Replacement in Placentia and the surrounding area, including Yorba Linda, Fullerton, Brea, and Villa Park. If you’re a few blocks over the city line, we’ve got you covered with the same written pricing and 365-Day Done Right Promise. Scheduling works the same way: call (682) 281-2168, get a time, and track your tech’s arrival live.
Serving Placentia, CA - Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Placentia
Only if the rough opening changes size. A same-size exterior door swap in Placentia typically doesn’t require a permit, but widening the opening, adding a sidelight, or changing the structural header does. We’ll tell you during the estimate which category your project falls into, and we pull the permit on any job that needs one. Call (682) 281-2168 for a scoped estimate with permit requirements listed in writing.
A standard interior slab swap takes one day. An exterior door replacement with a new frame, flashing, and sill pan usually takes two days, including inspection scheduling if a permit applies. Out-of-square rough openings in older Placentia tract homes can add a few hours of jamb work. We’ll give you a realistic timeline in writing before we start.
Two things, mostly: seasonal humidity swelling a solid-core slab, and rough openings that were never square to begin with. Placentia’s summer humidity makes solid wood doors expand enough to bind against the jamb. Older tract homes also settle over decades, shifting the frame. We diagnose which one it is, then fix it by planing and resealing, or replacing the slab if the warp is permanent. Call (682) 281-2168 for an assessment.
We install Therma-Tru, CGI, ViewLux, CWS, ES Windows, ECO Window Systems, Mr-Glass, and PGT products. For Placentia’s sun and winter rain, Therma-Tru fiberglass and CGI impact-rated units are two of our most common recommendations on exterior entries. The right pick depends on your exposure, jamb depth, and glazing needs, and we’ll match the door to your home rather than pushing one brand.
Yes, if the frame is solid, square, and free of water damage. We replace plenty of interior slabs in Placentia without touching the jamb. If the frame has rot, termite damage, or is out of square beyond a simple fix, a slab swap alone won’t hold up. We’ll measure the opening, check the jamb, and give you an honest recommendation with a written price either way. Call (682) 281-2168 to schedule.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Placentia door replacement and installation with written pricing and the 365-Day Done Right Promise.










Before
After
Before
After
Before
After