Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Burbank
Our Window Replacement in Burbank means working with walls that never quite match the stock-size catalog. Most homes here split into two eras: pre-1940 bungalows on streets like Keystone and Orchard, and 1950s-60s ranch tracts on the Rancho side. Nearly every replacement we pull from those walls is a non-standard rough opening, not a stock size. That’s why we scope every Burbank job with a physical measurement before ordering anything. Typical window installation in Burbank runs $450 to $1,400 per window, with bay window installation starting around $3,200. Call (682) 281-2168 for a written quote on your specific openings.
Why Juniper Windows & Doors Is Burbank’s Preferred Window Installation Company
We’re the Window Installation team inside the Relay Home Co. family, and we’ve been doing this since 2001. Burbank homeowners call us because our crews know what waits behind the stucco and siding here. A 1947 bungalow in Magnolia Park and a 1962 ranch in Rancho present completely different framing realities, and our installers read both from the first wall inspection. Our Burbank customers get background-checked, uniformed technicians who arrive with a live arrival time sent to their phone, not a four-hour window of “sometime.” Sean Mackey leads our installation crews with a simple standard: every job gets a written price before a single screw turns, and that price is backed by the 365-Day Done Right Promise, parts and labor, in writing.
Bay Window Installation in Burbank
Bay window installation in Burbank is one of the more involved window projects we take on, and it starts with understanding the wall you’re working with. A projecting bay adds square footage and light, but it also changes the load path on the wall and the roof overhang above it. For a Burbank homeowner with a 1940s bungalow or a mid-century ranch, this often means reinforcing the rough opening, building a new knee brace or support platform, and flashing every seam so a Santa Ana rain doesn’t find its way inside. A bay window installation in Window Installation in Burbank typically runs $3,200 to $7,800 depending on width, depth, and whether you’re replacing an existing bay or cutting a new opening. We quote that number in writing before any materials are ordered.
What a Burbank bay window replacement involves
When we replace an existing bay in Burbank, the first step is removing the old unit and inspecting the cantilevered support underneath. Many older installations here were framed with undersized headers or no continuous flashing, so we rebuild that support properly before setting the new sash. The new unit gets a continuous sill pan, head flashing, and a full perimeter seal. If the old bay leaked, we find the source before the new window goes in.
New bay window openings on Burbank homes
Cutting a new bay window opening changes the structural loads on the wall, which is why we pull permits for this work in Burbank. Building & Safety wants to see the framing plan, the header size, and the support details before we cut. Our team handles the permit drawings and the inspection scheduling, so you’re not chasing down paperwork. The construction phase typically takes three to five working days from opening to final trim.
Window Contractor in Burbank
Choosing a window contractor in Burbank usually comes down to one question: who will actually show up and do the work the way it was priced? We bring a different answer. Our Window Contractor team provides a written line-item price before any work starts, and that number doesn’t change unless you change the scope. When you book with us, you get The Relay Standard: a live arrival time you can track, before-and-after photos of every job, and a digital invoice you can pay from a link. In Burbank, where a 1940s rough opening can hide shimmed-out framing or an unpermitted prior repair, that level of visibility matters. We also stock parts for PGT, ViewLux, and Therma-Tru locally, so Burbank customers don’t wait weeks for a sash or a balance cartridge.
Scope and measurement before the quote
Every Burbank job starts with a site visit and a measured survey of each opening. We’re looking for the actual rough opening dimensions, not the glass size, because those two numbers can differ by a half-inch or more on older homes. That half-inch difference changes the order from a stock size to a custom unit, which changes the price and the lead time. We’d rather catch it before the order is placed.
Permit coordination for Burbank window work
Burbank Building & Safety requires permits for structural window changes, including new bay openings, resizing existing openings, or replacing a window when the rough opening changes. Simple insert replacements in the same opening often fall under a repair scope, but we check with the city on every job before we start. Our team pulls the permits, schedules the inspections, and stays on site until the inspector signs off.
Trusted Brands We Service in Burbank
Burbank homeowners don’t have to pick from a single product line and hope it fits. We work with eight manufacturers, including PGT, CGI, CWS, ViewLux, and Therma-Tru, so the right glass and frame for a hot west-facing wall or a shaded north-facing bedroom is never a compromise. PGT’s impact-rated low-E insulated glass units are a common choice in Burbank for homes that catch the worst of the afternoon sun. We order each unit to the exact rough opening, not the other way around. Burbank customers also benefit from our local parts access: replacement balances, latches, and sashes arrive faster because we’re not shipping every piece across the country.
Common Window Installation Problems We See in Burbank Homes
- Non-standard rough openings on pre-1940 bungalows: Streets like Keystone and Orchard are full of homes built before window manufacturing standardized. The rough opening might be 33 1/2 inches wide instead of the 32 or 36 a stock double-hung assumes, which means a custom order or a trim-out if someone already ordered the wrong size.
- Unpermitted prior window work discovered during plan check: Burbank Building & Safety reviews the wall when we file for a new opening or a structural change. If a previous owner did window work without permits, the plan check catches it, and the inspection scope expands before the first unit goes in. We handle that conversation with the city directly.
- Flashing failures on stucco flush-fin windows: A skipped or poorly lapped flashing detail on a flush-fin window in a stucco wall holds fine until the first real Santa Ana wind-driven rain. Then the jamb and head leak. We flash every installation with a continuous sill pan and properly lapped head flashing.
- West-facing heat gain on Glenoaks and Magnolia Park homes: Burbank’s afternoon sun on a west wall can push interior temperatures up noticeably in summer. We recommend low-E insulated glass units with the right solar heat gain coefficient for those exposures, and we explain what the U-factor and SHGC numbers mean in plain language before you choose.
Pricing for Window Installation in Burbank, CA
Window installation in Burbank runs $450 to $1,400 per window for most insert replacements, depending on the frame material, glass package, and whether the opening is standard or custom. A bay window installation starts around $3,200 and goes up from there. Three-panel sliding windows run $1,800 to $4,500. Casement windows typically land between $700 and $1,900 each. What drives the price in Burbank specifically is the rough opening: a 1940s bungalow often needs custom-sized units and some framing correction, while a 1960s ranch with standard openings can use stock sizes. We give you the full written price before ordering, and free estimates. Call (682) 281-2168 to schedule a measured site visit.
We Also Serve Cities Near Burbank
Our crews serve Burbank and the surrounding Los Angeles County communities. We regularly work in Glendale, West Hollywood, Altadena, and Beverly Hills, where the housing stock and permitting realities vary. If you’re in a neighboring city, we bring the same written price and 365-Day Done Right Promise to your project. Call (682) 281-2168 to check availability in your area.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Burbank
You need a permit in Burbank when the window opening changes size, when you’re cutting a new opening, or when the structural framing around the window is altered. Simple insert replacements in the same rough opening often fall under a repair scope, but the city reviews each application, and we file with Burbank Building & Safety on every job where a permit applies. We also handle the inspections. Call (682) 281-2168 if you want us to check your specific project before you start.
Usually not. The rough openings on pre-1940 Burbank bungalows, especially those near Keystone and Orchard, are frequently a half-inch or more off from today’s standard sizes. A 33 1/2-inch opening will not accept a stock 32 or 36 without modification. That’s why we measure the actual rough opening before we quote, which means a custom-sized unit ordered once instead of a re-order and a stalled project. Free estimates at (682) 281-2168.
A standard insert replacement takes one to two hours per window once the units arrive. A full house of windows can be done in one to three days. Bay window installations and new openings take longer: three to five working days from framing to final trim, plus the permit review time, which in Burbank can add two to four weeks depending on the current Building & Safety queue. We coordinate the schedule around the permit timeline.
The size of the opening, whether it’s standard or custom, the frame material, the glass package, and whether the framing needs correction all drive cost. In Burbank, we commonly see mid-century ranches with standard-size openings that price near $450 to $900 per window, while older bungalows with non-standard openings and shimmed framing land closer to $900 to $1,400 per window. Bay window installations begin around $3,200. For an exact written quote on your openings, call (682) 281-2168.
The price only changes if the wall reveals something the original quote couldn’t see: rotted framing, an unpermitted prior window repair, or a rough opening that was measured wrong by someone else. That’s why we measure every opening before quoting and note any visible framing concerns. If the previous window work was done improperly and the city expands the inspection scope, we bring that to you with a revised written price before proceeding. No surprise invoices at the end. Call (682) 281-2168 to book a free measured estimate and get your number in writing.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Burbank’s window installation needs with the Relay Home Co. family.