Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Danville
Window replacement in Danville, CA typically runs $850 – $1,900 per window for full-frame retrofits and $550 – $1,100 per window for insert replacements, depending on glass spec, frame material, and what the existing opening looks like once demo starts. Most Danville homes built between the 1960s and 1990s still carry original aluminum or first-generation wood double-hungs, which means the honest answer to “what will this cost” starts with a real measurement at the rough opening, not a phone estimate. Our Window Replacement team handles that scoping work in Danville every week, and we’ll give you a written price before a single screw turns. Call (682) 281-2168 to schedule a free estimate.
Why Juniper Windows & Doors Is Danville’s Preferred Window Replacement Company
Juniper Windows & Doors has spent more than two decades replacing windows across the San Ramon Valley, and Danville’s particular mix of 1960s ranches off Sycamore Valley Road, 1980s two-story traditionals near Greenbrook, and newer custom builds in Blackhawk keeps our crews sharp on every frame type you’ll find here. We’re led by Sean Mackey, who set the standard that every Danville job gets a written price before work begins and a 365-Day Done Right Promise after it’s finished. If the work isn’t right, we make it right, parts and labor, for a full year.
Customers in Danville care about two things more than anything else: knowing the price won’t move once work starts, and knowing who’s walking through the door. Every Juniper technician is background-checked and uniformed. Every quote is line-itemed and locked in writing. And when you call (682) 281-2168, a real person answers, 24/7. No voicemail maze, no callback queue.
Window Repair in Danville
Window repair in Danville usually means one of three things: a failed insulated glass unit that’s fogged between the panes, a rotted wood sash or jamb on an older double-hung, or hardware that’s worn out, like a crank mechanism on a casement or a balance that no longer holds the sash up. Most Danville repair calls land in the $180 – $540 range for glass replacement or hardware work, while rotted frame repair that requires cutting out and rebuilding a jamb runs higher, typically $400 – $900 depending on how far the rot has spread.
Fogged Glass Units
When the seal on an insulated glass unit fails, moisture gets between the panes and the window fogs permanently. On a Danville home with original 1980s wood windows, this is common, and replacing just the glass unit is almost always cheaper than replacing the whole window. We source the replacement IGU to the exact size and spec of the original sash.
Sash and Jamb Repairs
Wood windows in Danville’s older neighborhoods take a beating from summer heat and winter moisture swings. Rotted bottom rails and sill horns are the usual culprits. We’ll assess whether the rot is localized enough to patch with wood filler and epoxy consolidation or whether the sill needs to be replaced entirely, and we’ll tell you which before we quote.
Window Replacement Company in Danville
A Window Replacement Company doing the job correctly in Danville has to account for stucco and wood-siding tie-ins, because this valley’s housing stock doesn’t lend itself to snap-in insert replacements the way newer vinyl-sided suburbs do. A typical full-frame replacement on a 1970s Danville ranch runs $1,100 – $1,900 per window, including cutting out the old aluminum frame, repairing the rough opening, re-flashing, setting the new unit, and patching the stucco or re-trimming the siding. Insert replacements, where the existing frame is square and solid, run $550 – $1,000 per window.
Full-Frame Stucco Retrofit
Danville’s original aluminum windows were set directly into stucco, which means removing them involves cutting back the stucco around the opening to expose the framing. The new window gets flashed properly, set into a square opening, and the stucco patch is applied and cured before trim goes back on. This is the only correct approach when the old frame is rotted, out of square, or too shallow for a modern insulated unit.
Insert Replacement When the Frame is Solid
If the existing wood or aluminum frame is still square, dry, and structurally sound, an insert replacement drops into that frame with minimal disruption to interior and exterior trim. It’s faster and cheaper, and in Danville it’s most common on well-maintained 1990s traditional homes where the original windows were kept painted and caulked. We’ll measure, tell you honestly which path applies, and write the price for that path.
Trusted Brands We Service in Danville
We install and service windows from eight product lines, and for Danville homes we lean on CGI for impact-rated strength, ES Windows for clean sightlines and custom sizing, and ECO Window Systems for high-performance low-E glass at a mid-range price. Because we stock common parts and have direct access to manufacturer sizing data for these lines, we can get Danville customers a faster turnaround on both replacements and glass-unit swaps than a contractor who has to broker every order through a third party. The right window for a north-facing bedroom is not the right window for a west-facing living room, and we spec them accordingly.
Common Window Replacement Problems We See in Danville Homes
- Original aluminum frames in stucco walls. These 1960s – 1970s units were set directly into stucco, so removal means cutting back the stucco and re-flashing every opening. Any quote that assumes a simple insert here is low by hundreds per window.
- West-facing glass that turns the room into an oven. Danville’s inland valley sun hits west and south elevations hard from April through October. Original single-pane or early double-pane without low-E coatings lets too much solar heat through, and the SHGC spec on the replacement glass is the single biggest comfort lever you control.
- Rotted wood jambs on first-generation double-hungs. Homes near the Danville Library and over in the Greenbrook and Sycamore neighborhoods often show jamb rot at the bottom corners, where irrigation overspray and winter rain sat against the sill. A window that looks fine from the inside can be mush at the rough opening.
- Out-of-square rough openings. Houses settle, and Danville’s clay-heavy soil does that job efficiently. When the rough opening is 1/4 to 1/2 inch out of square, a stock-sized insert won’t seat properly, and the job shifts to a full-frame replacement with shims and re-flashing.
Pricing for Window Replacement in Danville, CA
A full window replacement project in Danville runs $850 – $1,900 per window for full-frame work and $550 – $1,100 per opening for inserts, and those ranges hold for most of the 1960s – 1990s ranches and two-story traditionals in this market. Glass spec moves the number: a standard low-E insulated unit on a shaded north wall costs less than an impact-rated CGI unit with a low SHGC for a west-facing elevation. Stucco repair, rotted jamb rebuilds, and out-of-square correction are the three most common change drivers we identify during the measuring visit, and we build them into the written price before work starts, not after. Call (682) 281-2168 for a free estimate, and you’ll have a line-itemed number in writing.
| Window Replacement Scope | Typical Danville Cost Range |
|---|---|
| Insert replacement, standard low-E glass | $550 – $1,000 per window |
| Full-frame retrofit, stucco tie-in | $1,100 – $1,900 per window |
| Fogged glass unit swap (IGU only) | $180 – $450 per unit |
| Rotted jamb / sill repair | $400 – $900 per opening |
| Impact-rated upgrade (CGI or equivalent) | Add $250 – $600 per window |
How a Danville Window Replacement Actually Runs
We recently replaced a full set of original aluminum single-pane double-hungs on a 1970s ranch off Sycamore Valley Road with PGT low-E insulated glass units. Cutting the old aluminum frames out of the stucco meant repairing and re-flashing every opening before the new sashes went in. Once the units were set and the stucco patch cured, the owner noticed the west-facing rooms stopped cooking in the afternoon, the drop in SHGC on the low-E glass did most of that work. We followed the same sequence on a second home near the Danville Library with CGI casement units in a wood-siding wall, where the jamb extensions and trim work drove the schedule more than the glazing did.
That’s the honest scope of a Danville window job: permit path, stucco or wood-siding tie-in, orientation-specific glass spec, and the conditions at demo that move the price. Not a generic script. The permit piece matters too. Danville requires a building permit for window replacement when the opening size changes or the work is full-frame, and we pull it, schedule the inspection, and close it out. For insert replacements where the opening is untouched, the permit path is simpler, but we’ll confirm with the town before we quote so there’s no surprise at the counter.
We Also Serve Cities Near Danville
Beyond Danville, our crews run the same written-price standard into San Ramon, Clayton, Alamo, and Dublin. If you’re in a neighboring city and want the same Window Replacement in Danville process applied to your home, call (682) 281-2168 and we’ll schedule a measuring visit.
Serving Danville, CA - Our Local Coverage Area
We’re based in the Danville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Danville
Yes, full-frame replacement or any job where the rough opening size changes requires a building permit from the Town of Danville. Insert replacements that keep the existing frame and opening untouched typically don’t, but we confirm with the town on every job before quoting. We pull the permit, schedule the inspection, and close it out so you don’t have to chase it. Call (682) 281-2168 and we’ll tell you which path applies to your house.
Most Danville projects run 3 – 6 weeks from the first measuring visit to final inspection, with the physical installation taking 1 – 3 days depending on window count and whether stucco patching or trim work is involved. The schedule is driven by manufacturing lead times on custom-sized units, not by our calendar. We’ll give you a written schedule with the written price, and the 365-Day Done Right Promise covers the work for a full year after sign-off.
The three things that move a Danville window price are rotted wood at the rough opening, out-of-square framing that forces a full-frame retrofit instead of an insert, and the glass spec you choose for south- and west-facing elevations. We identify all three during the measuring visit and write them into the price before work starts. If demo reveals something hidden, we stop, show you photos, and get a written change order signed before proceeding. No surprise invoices. Estimates are free, call (682) 281-2168.
For west-facing windows in Danville, you want a low-E coating with a low SHGC, ideally in the 0.25 – 0.30 range, so the glass rejects most of the afternoon solar heat while still letting in daylight. South-facing windows benefit from the same low SHGC, while north-facing windows can run a higher SHGC to maximize passive warmth. We’ll spec each window by its orientation, not by what looks good in a brochure. Call (682) 281-2168 for a free estimate with glass specs written line by line.
Yes, in Danville we repair fogged glass units, rotted sashes, worn hardware, and failed balances whenever the frame is still sound, and repairs typically run $180 – $900 depending on what failed. If the frame is rotted through or out of square, repair becomes a false economy and full-frame replacement is the correct fix. We’ll tell you straight which applies, with a written price either way. The number is (682) 281-2168.
Get a Written Price Before Work Starts in Danville
Danville’s older housing stock doesn’t reward guesswork, and neither do we. Every window replacement project we scope in this town gets a measuring visit, a line-itemed written price, a permit check, and a schedule before any work begins. Our technicians are background-checked and uniformed, our phone is answered live 24/7, and every completed installation is backed by the 365-Day Done Right Promise, parts and labor, in writing. If the work isn’t right, we make it right for a full year. Call (682) 281-2168 today to schedule your free estimate.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Danville and the San Ramon Valley.