Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Windows & Doors in Los Angeles, CA | Juniper Windows & Doors
We provide independent CGI windows and doors service across Los Angeles, from Sherman Oaks to Silver Lake. The thing that sets our CGI work apart here: we understand how Los Angeles permits, Title 24 energy checks, and fire-zone glazing requirements interact with these specific windows. If your CGI sliders are dragging or your impact glass has a failed seal, call (682) 281-2168. We’ll diagnose it straight.
Why Los Angeles Residents Choose Us for CGI Service
Sean Mackey grew up in Silverlake and has been working on windows and doors across Los Angeles for well over a decade. He learned building envelope fundamentals at Los Angeles Trade-Technical College, and he’s the first to tell you that a window is only as good as what surrounds it. That matters with CGI units, because the frame, the glazing, and the rough opening all have to work together, especially when a hillside inspector is involved.
Our crews work on CGI products every week. That means we know the Series 1300 single-hung, the Series 1500 horizontal roller, the Series 5500 impact-rated vinyl, and the CGI impact entry door systems by their real names and their real failure points. We stock CGI-compatible rollers, weatherstripping, and glazing beads for faster turnaround in Los Angeles. And because we’re independent, not a manufacturer rep, the answer you get isn’t a default “replace everything.” It’s what the window actually needs.
Juniper Windows & Doors is part of the Relay Home Co. family, founded in 2001. Every job, including CGI service, gets a written price before work begins, and every completed repair is covered by the 365-Day Done Right Promise: 365 days, parts and labor, in writing. Calls are answered by a live person around the clock. You’ll also get a live arrival time before we show up.
Common CGI Windows & Doors Problems We Solve in Los Angeles
- UV-degraded vinyl frames and sashes. Los Angeles sun is brutal on west- and south-facing CGI windows. We regularly see yellowing, brittleness, and warped sashes that throw the unit out of square and break the seal. In Sherman Oaks and Studio City, this is the single most common CGI call we get.
- Failed weatherstripping and glazing seals on sliders and single-hungs. The coastal marine layer pushes moisture in from the west, and Santa Ana winds drive fine dust into every track. Once the weatherstripping fails on a CGI horizontal roller, the track loads up with grit and the seal starts to go. That’s how fogged insulated glass units start.
- Roller and track wear on CGI 3-lite sliding windows. Older CGI sliders near the coast accumulate sand and grit in the bottom track. Rollers flatten, panels drag, and eventually the panel jumps the track. We pull the panels, replace the rollers with CGI-compatible hardware, and clean and lubricate the track properly.
- Impact-glass seal and gasket failure. CGI impact-rated units carry heavy laminated glass. That weight stresses the gaskets and frame corners, especially on south-facing walls that bake all day. Water intrusion at the mitered corners is a tell. We re-seal and re-set the glazing bead when the frame is still sound.
- Fogged insulated glass units (IGUs). A fogged CGI IGU in Los Angeles usually traces back to a seal that gave out after repeated hot-cold cycling, or a small frame warp from heat. If the vinyl is still solid, we can often replace just the glass unit rather than the entire window.
CGI Service in Los Angeles: What Local Conditions Mean for Your Equipment
Los Angeles requires impact-resistant glazing in many hillside and fire-adjacent zones, and the city’s Los Angeles Window Replacement permits often trigger Title 24 energy-compliance checks. That means a CGI impact window in Los Angeles can’t just be swapped in. It has to carry the correct glass package and documentation, and the replacement has to align with what the permit specifies. If you bought a home in Studio City or the hills above Sherman Oaks and your CGI impact units are original, we often find the paperwork doesn’t match the glass actually installed. That becomes a problem at resale, not just at inspection. Our job is to make sure what’s in the wall matches what’s on paper, and that the unit still performs. That’s a Los Angeles-specific concern. A homeowner in Riverside doesn’t deal with the same combination of fire-zone code, Title 24, and coastal air.
One detail Sean mentions on site: “If it belongs on the page, I’ll put it there, number, timeframe, or trade-off.” It applies to estimates, and it applies to code. If a CGI repair will require a permit because of where the house sits, we’ll tell you before the quote, not after.
In Sherman Oaks, a homeowner’s CGI horizontal roller windows were dragging so badly the panels wouldn’t slide, and the track was packed with grit from a recent Santa Ana wind event. We pulled the panels, replaced the flattened rollers with CGI-compatible hardware, cleaned and lubricated the track, and re-set the weatherstripping. The sliders now glide, and we scheduled a follow-up to check the IGU seals before summer heat hits.
CGI Models & Products We Service in Los Angeles
We work on the full CGI line that’s common in Los Angeles homes: Series 1300 Single-Hung Vinyl Windows, Series 1500 Horizontal Roller (Slider) Windows, Series 5500 Impact-Rated Vinyl Windows, and CGI Impact Entry Door Systems. We also handle CGI sales & service for homeowners who need a unit matched to an existing opening.
Parts approach: we use CGI-compatible OEM-spec rollers, weatherstripping, glazing beads, and seals when they’re available. When a part is discontinued or backordered, we use high-quality aftermarket equivalents and we tell you which one went in. If the frame is structurally sound and only the glass unit or hardware failed, we recommend a targeted repair. If the vinyl is brittle, warped, or the IGU is permanently fogged, we walk through replacement options honestly. We stock common CGI hardware locally in Los Angeles, which keeps turnaround shorter than waiting on a freight shipment.
CGI Service Pricing in Los Angeles
Here’s what CGI work typically runs in Los Angeles. A single-hung sash re-alignment and weatherstripping replacement usually lands between $180 and $340. Roller replacement on a CGI horizontal slider runs $220 to $475 per panel, depending on access and whether the panel has to come out. A single IGU replacement for a CGI unit: $400 to $900, based on glass type and whether it’s impact-rated. A full our Window Installation in Los Angeles, including the permit coordination and Title 24 paperwork, starts around $950 and can exceed $2,600 for impact entry systems with side lites.
What drives the cost: whether the opening needs permit documentation, whether the glass is impact-rated, and how much frame material has degraded. A free estimate from us includes a written, line-item price before any work starts. No number changes at the door. Call (682) 281-2168 to schedule that estimate.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Los Angeles
In many cases, yes, and that’s especially true in hillside and fire-adjacent zones where impact glazing requirements apply. Los Angeles window replacement permits often trigger Title 24 energy-compliance checks too. We handle that paperwork as part of the project, so you’re not guessing at the counter. Call (682) 281-2168 and we’ll tell you what your specific address triggers before anything is ordered.
Often yes, if the vinyl frame is still structurally sound and the fogging traces to a failed IGU seal rather than a warped frame. We replace just the glass unit with a CGI-spec IGU. If the frame has gone brittle from Los Angeles sun, replacement is the honest call. Either way, the estimate is free.
Grit. Los Angeles wind events push fine dust and sand into the bottom track, the rollers flatten over time, and the panel lifts enough to jump. We replace the rollers with CGI-compatible hardware, clean the track, and re-set the weatherstripping. It’s a same-visit fix in most cases. Call (682) 281-2168 to get on the schedule.
If your home is in a designated hillside or fire-adjacent zone, there’s a strong chance the original construction or a past permit required impact-resistant glazing. That often includes specific documentation. We can check the requirements for your address. If you’re unsure, call us and we’ll help you find out before you spend anything.
Keep the bottom tracks clear of grit, especially after Santa Ana wind events. Wipe down the weatherstripping twice a year, and don’t pressure-wash the sashes. West- and south-facing CGI vinyl frames take more UV than any other location. A visual check once a year for yellowing or hairline cracks catches problems before the seal fails. If you want us to do that check, it’s part of our regular service call.
Service Areas Near Los Angeles
We serve homeowners throughout Los Angeles and the surrounding metro. For CGI work farther south, see CGI service in San Diego. Up the coast and inland, we also cover CGI service in San Jose. Our full Los Angeles service area page maps every neighborhood we work in.
Book Your CGI Service in Los Angeles Today
If your CGI windows are dragging, fogged, or losing their seal, call (682) 281-2168. We’ll schedule a visit, give you a live arrival time, and hand you a written price before any work starts. Estimates are free.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Los Angeles since 2001.