T

Therma-Tru Windows & Doors in San Bernardino, CA

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

Single hung
Single hung
Double hung
Double hung
Horizontal roller
Horizontal roller
Casement
Casement
Bay & bow
Bay & bow
Sliding glass doors
Sliding glass doors
Entry doors
Entry doors
Impact garage doors
Impact garage doors
PGT
PGT
CGI
CGI

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Therma-Tru Windows & Doors in San Bernardino, CA | Juniper Windows & Doors

Therma-Tru service in San Bernardino typically runs $75 to $450 for repairs like hinge shims, sweeps, and multi-point lock cassettes, while full entry door replacements start around $2,800. We’re Juniper Windows & Doors, an independent shop that handles San Bernardino Window Replacement and works on Therma-Tru fiberglass and steel entry systems and their window lines across the Inland Empire. What sets our Therma-Tru work apart here is simple: we keep the obscure parts on the shelf, so a sagging slab or seized lock doesn’t mean waiting two weeks for a factory shipment. Call (682) 281-2168 and we’ll give you a written price before anything gets touched.

Call (682) 281-2168

Why San Bernardino Residents Choose Us for Therma-Tru Service

We diagnose Therma-Tru problems every week, from cracked sidelites to door slabs that have dropped out of square. Most shops that say they service Therma-Tru actually mean they’ll sell you a new door. We’d rather fix the one you have, if it’s structurally sound. Sean Mackey, our owner, spent enough summers watching his uncle reframe old Craftsman windows to know that a door that closes with one push is the whole point. He learned the technical side at Los Angeles Trade-Technical College, where building envelope fundamentals explained why a door that binds in July is really a hinge and slab-rack problem, not a mystery. That’s the lens we bring to every Therma-Tru door in San Bernardino. We work on Smooth-Star, Fiber-Classic, Classic-Craft, and Benchmark patio doors specifically because we know where they fail and which parts fix them. If it belongs on the page, we’ll put it there – number, timeframe, or trade-off.

Common Therma-Tru Windows & Doors Problems We Solve in San Bernardino

  • Fiberglass slab expansion and hairline cracking. San Bernardino’s inland heat cycles – 100°F-plus days followed by cool desert nights – make Therma-Tru fiberglass slabs and sidelites expand and contract. The stain-grade finish develops hairline cracks, and the glass frame gaskets loosen. We sand, re-seal, and re-set the gaskets so the door looks right and stops losing conditioned air.
  • Seized multi-point lock gearboxes. Blown dust and grit from the Cajon Pass work their way into the lock body. The thumbturn goes stiff, then the door stops latching at the strike. It’s common on west-facing doors in San Bernardino after a single summer. We replace the cassette with OEM Therma-Tru hardware, not an aftermarket lock body that rarely aligns with Therma-Tru’s preps.
  • Hardened door sweeps and weatherstrip. Dry heat bakes the bottom sweep until it’s flat and brittle, letting in daylight and dust along the slab. The sweep is usually the first casualty, before the hinge screws start to pull. We stock replacement sweeps and gaskets locally, so this is a same-visit fix most of the time.
  • Dragging patio door panels and worn awning window pivots. On Therma-Tru sliding patio doors and awning windows, rollers and sash pivots wear out. The screen track fills with blown sand, and the panel starts to drag or drop out of square. We clean the track, replace the rollers, and re-square the panel so it glides without lifting.
  • Cracked or failed sealed glass units. A sidelite or door glass unit that fogs between the panes means the seal has failed. We replace the glass unit itself when the slab and frame are still solid. If the slab is warped or the frame is rotted, we’ll tell you straight that a full replacement door is the better spend than chasing parts.

Therma-Tru Service in San Bernardino: What Local Conditions Mean for Your Equipment

San Bernardino sits in a high-wind zone off the Cajon Pass and the Santa Ana corridors, and that reshapes how Therma-Tru doors wear here. The same Fiber-Classic entry door that holds square for a decade in a coastal Orange County tract will take repeated slab rack in San Bernardino, especially on northside streets like Kendall Drive where gusts come straight down the pass. What does that mean in practice? Hinge screws pull, the slab drifts off the strike, and the sweep compresses hard against the threshold. We end up adjusting hinges and replacing sweeps far more often than inland-valley shops do, because the wind load here is a real, recurring force on the door, not a seasonal nuisance. We got a call from a homeowner on the north side of San Bernardino off Kendall Drive about a Therma-Tru Fiber-Classic entry door that had stopped latching and was letting in daylight along the strike side after last summer’s heat. Our tech found the multi-point gearbox seized with grit and the bottom sweep flattened hard as a brick, so we replaced the cassette and sweep, shimmed the hinges to bring the slab back into square, and re-sealed the sill pan. The door closed with one push and the deadbolt threw clean again – no new door needed.

Therma-Tru Models & Products We Service in San Bernardino

We work on the full Therma-Tru residential lineup: Smooth-Star fiberglass entry doors, Fiber-Classic and Classic-Craft door collections, Benchmark and Profiles patio door systems, and doors with Simulated Divided Lite (SDL) or decorative glass options. Our parts approach is specific. We use OEM Therma-Tru hardware – multi-point cassettes, hinge shims, sill pans, sweeps, and gaskets – whenever the door or window is structurally sound, because aftermarket lock bodies rarely align with Therma-Tru’s preps. We stock the common wear items locally so San Bernardino homeowners aren’t waiting on a factory order for a bottom sweep or a hinge shim. If the slab is warped, the frame is rotted, or the sealed glass unit has failed, we’ll tell you honestly that a full replacement door or window is the better spend. You can read more about how we handle Therma-Tru sales & service across the region.

Therma-Tru Service Pricing in San Bernardino

Repair work on Therma-Tru doors and windows in San Bernardino typically falls between $75 and $450, depending on what’s actually wrong. A bottom sweep replacement runs $75 to $150. Hinge shims and slab re-squaring sit in the $150 to $250 range. A multi-point lock cassette replacement is $280 to $450 with OEM hardware. Full entry door replacements start around $2,800 and climb with glass options, sidelites, and hardware choices. Sliding patio door service – rollers, track cleaning, and re-squaring – usually lands between $200 and $400. What drives the cost is the part, the labor to re-align the slab, and whether we’re repairing or replacing. Every estimate is written, line-itemed, and locked before work starts – no number changes once we’re on site. Call (682) 281-2168 for an exact quote on your door.

Serving San Bernardino, CA - Our Local Coverage Area

We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs – Therma-Tru Windows & Doors in San Bernardino

Service Areas Near San Bernardino

In addition to San Bernardino service area coverage, we make the drive to nearby Inland Empire communities. You’ll find our Therma-Tru work in Therma-Tru service in Fontana and Therma-Tru service in Moreno Valley on a regular basis. No matter which side of the pass you’re on, the written-price rule applies.

Book Your Therma-Tru Service in San Bernardino Today

If your Therma-Tru door is dragging, letting light through the sweep line, or refusing to latch, we’ll diagnose it and hand you a written price before any work starts. Call (682) 281-2168 to schedule your free estimate in San Bernardino.

Written by Sean Mackey, Owner at Juniper Windows & Doors, serving San Bernardino since 2001.

Need Windows & Doors help in San Bernardino? Licensed & insured · Free written quotes response · free estimates
Call (682) 281-2168
Areas We Serve

Request a Free Estimate in San Bernardino

Tell us what you need - Juniper Windows & Doors responds fast. No obligation.

By clicking submit, you accept our Privacy Policy and consent to receive communications by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch