VLX 80 Awning Window

VLX 80 Awning Window in Los Angeles, CA | Juniper Windows & Doors

The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, letting you keep ventilation flowing even when it’s raining. For Los Angeles homeowners, that’s a real advantage: our mild, wet winters and dry, breezy summers mean you can leave windows cracked open through most seasons without worrying about water getting in. Juniper Windows & Doors is an authorized ViewLux installation partner in Los Angeles, which means you get the factory product, a warranty-protected install, and a single local team to call if anything ever goes wrong. We measure, install, seal, and stand behind the work. Call (682) 281-2168 for a free, no-pressure project estimate.

Call (682) 281-2168

Product Overview – VLX 80 Awning Window

The VLX 80 is built for people who want a window that does real work: it ventilates in rain, it insulates against Los Angeles heat, and it’s tough enough to hold up to decades of sun and salt air. The top-hinged design is the key. When the sash opens, the glass itself acts like a small awning over the opening, so rain runs off the face of the window instead of into the house. That’s why awning windows are so popular in coastal Los Angeles neighborhoods like Playa del Rey, Redondo Beach, and San Pedro, where afternoon marine layer and light drizzle are regular guests.

The frame is extruded aluminum with a wall thickness of 0.079 inches. That’s a substantial extrusion, stiffer and less likely to rack or twist than thinner residential profiles. The visible frame width measures 1.97 inches, which gives the VLX 80 a clean, modern sightline without looking industrial. Inside that frame is a polyamide thermal break separating the interior and exterior aluminum, which stops conductive heat transfer through the metal. In LA terms, that means the interior frame doesn’t cook in July or feel cold to the touch in January.

Buyers choose the VLX 80 for three reasons: the ventilation-in-rain capability, the slim-but-strong frame, and the energy performance that comes from a real thermal break, not a marketing claim. It’s a window that works hard in modern, mid-century, and transitional Los Angeles architecture alike.

Technical Specifications

Here’s what’s under the hood of the VLX 80. These are the numbers and options that matter when you’re comparing windows:

• Frame material: Extruded aluminum with thermal break
• Frame wall thickness: 0.079 inches
• Visible profile width: 1.97 inches
• Operation: Top-hinged awning, crank or manual operation
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed screen, Retractable screen
• Performance certifications: NFRC-rated energy performance, AAMA 2400/2410 compliant installation
• Sealant standard: AAMA 812 low-expansion foam on all perimeter joints

Performance Features

Thermal Efficiency. The thermal break inside the frame interrupts the natural flow of heat through aluminum. NFRC-rated energy performance means the VLX 80 has been independently tested for U-factor and solar heat gain, not just described in a brochure. For Los Angeles buyers, a Low-E glass package combined with this frame means lower AC use from June through October.

Acoustic Performance. The VLX 80’s frame structure and multi-point weather seal contribute to meaningful sound reduction. If you live near the 405, LAX flight paths, or a busy corridor like Sunset Boulevard, laminated glass takes it further. It’s a window spec that doesn’t just look good; it quiets the room it’s in.

Airtightness & Weather Seal. The compression gasket system engages fully when the sash closes, creating a continuous seal around the perimeter. Combine that with AAMA 812 low-expansion foam applied at installation, and you have a window that doesn’t leak air at the frame-to-wall transition, a common weak point in retrofit jobs.

Waterproofing. Awning windows have a natural advantage here because the sash overlaps the frame on the bottom edge, shedding water outward. The VLX 80’s drainage channels are engineered into the sill to evacuate any water that gets past the outer gasket. In Los Angeles, that matters most during January and February storm cycles.

Wind Resistance. The VLX 80 is wind-load rated for local climate requirements, including the elevated exposure zones in the foothills and canyon areas: Malibu, Topanga, La Cañada, and the San Fernando Valley’s gust corridors. The 0.079-inch wall thickness contributes directly to this rating.

Security & Hardware. The top-hinged sash can be left open a few inches for ventilation without creating a wide entry point. Multi-point locking hardware ties the sash into the frame at multiple positions, making the window significantly harder to pry than a single-latch casement. Laminated glass, if you choose it, adds another layer of intrusion resistance.

Color & Glass Options

The VLX 80 comes in six finishes. Premium Black and Anodized Silver are the two most common choices for modern and contemporary Los Angeles homes; black frames have become the default for new builds in neighborhoods like West Adams and Highland Park. Pure White suits traditional Spanish Revival and Mediterranean exteriors. Bronze matches the darker cladding and wood trim on many mid-century houses. Champagne works well with warm stucco tones and cream exteriors. Teak Wood is a powder-coated wood-look finish that gives you the warmth of wood-grain without the maintenance of real timber, popular on Craftsman homes in areas like Burbank and Pasadena.

On the glass side: Clear is the honest baseline. Frosted is for bathrooms, side yards, and street-facing windows where you want light without a view line into your home. Low-E is the energy-performance option; it reflects heat while letting light through. Tempered is safety glass, required by code in certain locations, including windows near doors and low sill heights. Laminated is the strongest option, offering both sound control and impact resistance.

Installation by Juniper Windows & Doors in Los Angeles

Installation is where most window projects succeed or fail. A top-quality window with a careless install will leak, bind, and fail early. In our experience working across Los Angeles, from older wood-framed homes in Echo Park to newer concrete-and-stucco construction in Playa Vista, the most common failure point is the perimeter seal, not the window itself.

That’s why our install process follows the AAMA 2400 and AAMA 2410 installation standards rather than cutting corners for speed. Every VLX 80 goes in level, plumb, and square, with shims placed to transfer the load properly, never to force a frame to fit an out-of-square opening. We apply AAMA 812 low-expansion foam at every perimeter joint, which seals against air and water infiltration without bowing the frame. Each window gets a final water test before we call the job done.

Los Angeles has its own challenges: wood framing that’s shifted over 80 years, stucco walls that crumble if cut wrong, hillside homes with unusual structural requirements. If you’re in an area with strict design review, like the Hollywood Hills or parts of Santa Monica, we coordinate with your plans and the local requirements. Improper installation voids the manufacturer warranty. We install every window so the warranty stays fully intact.

Frequently Asked Questions – VLX 80 Awning Window

Get a Quote – VLX 80 Awning Window in Los Angeles

If you’re planning a window replacement or new construction in Los Angeles, start with a free on-site measurement. We’ll come out, assess your openings, discuss glass and finish options, and give you a written, line-item quote with no change orders later. Call (682) 281-2168 today to start your project.

Written by the team at Juniper Windows & Doors, authorized ViewLux installation partner serving Los Angeles, CA.