Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Replacement Across Dixon
Door replacement in Dixon costs $1,200 to $4,800 for most exterior doors, with front entry doors typically running $1,800 to $3,500 installed and sliding patio doors landing between $2,200 and $4,800. The price depends on material, glass package, and whether your home sits in the downtown Historic Overlay District, which adds a design review step most neighboring cities don’t require. Our crews serve Dixon from the San Francisco Bay Area with local dispatch, and Sean Mackey leads every project with one commitment: a written price before any work starts. Call (682) 281-2168 to schedule your free estimate.
Why Juniper Windows & Doors Is Dixon’s Preferred Door Replacement Company
Dixon homeowners deal with specific realities: 100-degree summer afternoons, high-wind code requirements under the California Building Code, and a historic downtown with its own design review process. Our Door Replacement team has navigated all three. We understand that a door on a 1950s ranch near the Women’s Improvement Club has different jamb depths and framing than a newer build in the Valley Glen subdivision, and we plan for those differences before ordering any unit. Sean Mackey founded this company in 2001, and since then our crews have replaced doors across Dixon’s housing stock from early-20th-century downtown homes to late-90s and 2000s subdivisions.
Every Dixon homeowner gets the Relay Visibility Guarantee: a live arrival time you can track, before-and-after photos of the completed work, and a digital invoice you can pay from your phone. We answer calls 24/7 with a real person, not a voicemail tree. And every installation carries the 365-Day Done Right Promise. If the work isn’t right, we make it right, parts and labor, in writing, for a full year.
Door Installers in Dixon
Door Installers in Dixon handle the full replacement from tear-out to trim, and the work in this city often starts with a measurement call rather than a product order. That’s because Dixon’s older homes near downtown and along A Street frequently have non-standard rough openings, settled framing, and jamb depths that don’t match a stock door. Our installers confirm every dimension before ordering, then schedule the permit inspection sequence that Dixon requires. A straightforward front entry replacement runs $1,800 to $3,500; a sliding patio door typically costs $2,200 to $4,800.
Entry Door Installation
We remove the old slab and jamb, inspect the rough opening for rot or framing damage, then set and shim the new pre-hung unit plumb and square. In Dixon’s high-wind zone, the door must meet design pressure ratings that are checked during inspection. We flash and seal the rough opening before trim goes back on.
Patio and Sliding Door Replacement
Dixon’s hot summers punish old sliding doors with worn rollers and warped tracks. We replace them with new units that seal tight against triple-digit heat and meet the same wind pressure requirements as entry doors. The track is leveled, the frame anchored, and the threshold flashed for drainage.
Door Contractors in Dixon
Door Contractors in Dixon coordinate the pieces most homeowners don’t see until a project stalls: permit applications, historic overlay design review, inspection scheduling, and material lead times. If your home sits in Dixon’s downtown Historic Overlay District, any street-facing door replacement triggers a design review for style, material, and color before the building permit can be issued. That’s a step Vacaville and Woodland don’t impose on comparable homes, and skipping it means a stop-work order mid-installation. We handle the submittal and the follow-up. Typical contractor-coordinated entry door replacements run $1,800 to $3,500; sliding door projects run $2,200 to $4,800.
Permit and Inspection Coordination
Dixon requires a building permit for exterior door replacement, and the inspection verifies the design pressure rating of the unit in a high-wind zone. We pull the permit, schedule the inspection, and have a crew member on site when the inspector arrives. The paperwork is ours to handle.
Historic Overlay Design Review
Properties in the downtown Historic Overlay District need design review approval before a permit is issued for street-facing doors. We prepare the submittal with door style, material, and finish specifications that match the district’s character requirements. This adds time to the project calendar, but we build it into the schedule up front so there are no surprises.
Trusted Brands We Service in Dixon
We install and service Therma-Tru, PGT, ViewLux, and CGI doors, and we stock weatherstripping, thresholds, rollers, and hardware for these lines so Dixon customers aren’t waiting on parts shipped across the country. Therma-Tru fiberglass entry doors perform especially well in Dixon’s summer heat because they don’t warp the way wood does after years of 100-degree afternoons. PGT and CGI build impact-rated door glass that handles wind-borne debris without shattering, which matters in Dixon’s high-wind zone. ViewLux sliding doors give Dixon homeowners clean sightlines and tight seals on west-facing patio openings that take the afternoon sun.
Common Door Replacement Problems We See in Dixon Homes
- Rot in original wood jambs on pre-1970 homes. Dixon’s older homes near downtown and along First Street often have original wood jambs with decades of moisture exposure. Once the jamb rots, the door loses its seal and the lock stops latching properly.
- Warped doors from Dixon’s summer heat. South- and west-facing entry doors on Dixon homes bake in direct sun from June through September. Wood slabs warp, fiberglass holds its shape, and old weatherstripping dries out and cracks.
- Skipped historic overlay review causing stop-work orders. Street-facing replacements in downtown Dixon’s Historic Overlay District need design review before the permit. We’ve seen projects halted because a homeowner ordered a door without realizing this requirement applied.
- Design pressure mismatches at inspection. Dixon is in a high-wind-prone zone, and inspectors verify design pressure ratings on exterior doors. A non-rated door won’t pass, which means removal and reorder.
Pricing for Door Replacement in Dixon, CA
A front entry door replacement in Dixon typically runs $1,800 to $3,500 installed. Sliding patio doors land between $2,200 and $4,800. Material drives much of that range: a basic steel door with no glass starts around $1,200, while a Therma-Tru fiberglass entry door with low-E insulated glass runs higher. Historic Overlay design review adds a submittal fee and extends the schedule, but it doesn’t change the material or labor cost. Every Dixon project gets a written line-item price before work begins, and that number is the number. Call (682) 281-2168 for a free estimate with exact pricing for your home.
We Also Serve Cities Near Dixon
Our crews cover Door Replacement in Dixon and the surrounding communities. We regularly work in Vacaville, where the permit process is more straightforward, plus Davis, Winters, and Woodland. Same crews, same written pricing, same 365-Day Done Right Promise.
Serving Dixon, CA - Our Local Coverage Area
We’re based in the Dixon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Dixon
Yes. Dixon requires a building permit for exterior door replacement, and if your home is in the downtown Historic Overlay District, street-facing doors need design review approval before the permit is issued. We pull the permit and handle the review submittal. Call (682) 281-2168 and we’ll confirm what your specific address requires.
A standard entry door replacement takes one day on site once the permit is ready and the door has arrived. The full calendar, from measurement to final inspection, runs two to four weeks. Historic Overlay design review adds one to two weeks for downtown properties. We give you a schedule up front and keep it updated in real time.
We install and service Therma-Tru, PGT, ViewLux, and CGI products. We stock hardware, weatherstripping, thresholds, and rollers for these lines, so replacements and repairs in Dixon move faster than waiting on parts from a distribution center.
Rotted framing or a non-standard rough opening is the most common price change, because it means reframing or custom-sizing the unit. We catch this during the measurement call before we order anything, and the written price reflects what we found. The price we give you is the price you pay unless hidden damage is uncovered after tear-out, and we document that in photos before any additional work is approved. Call (682) 281-2168 for a free measurement appointment.
Yes, if your current door is drafty or has a single-pane glass insert. Dixon’s summer heat pushes cooling systems hard, and a sealed exterior door with low-E insulated glass reduces the air exchange that forces your AC to work harder. Our own project near the Women’s Improvement Club showed a noticeably cooler entry area on 100-degree afternoons once the old drafty unit was replaced with a Therma-Tru fiberglass door.
Call (682) 281-2168 to schedule your free door replacement estimate in Dixon. You’ll get a written price before any work starts, a live arrival time, and the 365-Day Done Right Promise backing the entire installation.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Dixon and surrounding communities since 2001.










Before
After
Before
After
Before
After