Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Windows & Doors in Pembroke Pines, CA | Juniper Windows & Doors
We repair and service CGI windows and doors across Pembroke Pines, and we’re the independent crew that tells you straight whether a unit is worth fixing or needs a code-compliant swap - like our Window Replacement in Pembroke Pines when repair won’t do. That matters here because Pembroke Pines sits in Broward County’s High-Velocity Hurricane Zone, so every repair and replacement decision runs through Florida Building Code HVHZ rules, not just what looks right. We service the full range of CGI impact products, from Series 3000 single hungs to aluminum French doors. Call (682) 281-2168 for a free estimate on any CGI window or door in Pembroke Pines.
Why Pembroke Pines Residents Choose Us for CGI Service
We spend our days working on CGI extrusions, glass packages, and hardware, so when a Pembroke Pines homeowner calls about a fogged impact window or a dragging horizontal roller, we usually know the failure before we finish walking the job. We’re an independent service company, not a CGI authorized dealer, which means our loyalty is to you and the condition of your window, not to a manufacturer’s replacement quota. Sean Mackey, our owner, grew up around old Craftsman window frames in Silverlake and has been doing windows and doors across South Florida for well over a decade. His rule is simple: “If it belongs on the page, I’ll put it there – number, timeframe, or trade-off.” If a repair makes sense, we say so. If replacement is the only legal or structural option, we explain exactly why. We also carry aftermarket CGI-compatible rollers, weatherstrip, pile, balances, and glazing seal products so most Pembroke Pines repairs don’t wait on a slow OEM shipment. For full CGI sales & service, our team is set up to handle everything from a single sash rebuild to a whole-home impact retrofit.
Common CGI Windows & Doors Problems We Solve in Pembroke Pines
- Fogged or failed impact glass. We see failed butyl and glazing seals on CGI impact IGUs constantly, and Pembroke Pines heat plus UV is the usual culprit. The result is fogging, silvery desiccation, and moisture between the panes. In most cases we can replace the IGU with an impact-rated unit and keep the existing frame.
- Wind-driven rain leaking at the sill or jamb. Degraded weatherstrip, felt fin seals, and pile on CGI single hung and horizontal roller sashes let Broward County humidity and storm rain find its way inside. We remove the old material, install new pile and weatherstrip, and seal the jambs so the sash seats like it should.
- Dragging or jumping horizontal rollers. Roller wheels and stainless hardware on CGI sliders and 3-lite rollers wear flat or corrode over time. A panel that once moved with two fingers starts needing a shoulder. That’s almost always a hardware swap, not a new door.
- Interior staining after a heavy storm. Sealant and perimeter flashing failures around CGI replacement inserts and full-frame units, especially in 1980s and 1990s Pembroke Pines subdivisions, show up as water marks at the corners or along the baseboard after a hard rain. We trace the leak, reseal the perimeter, and test before we call it done.
- Pre-failure edge seal degradation on laminated impact glass. Impact-rated laminated units can show edge degradation long before they visibly fail. If the edge seal is breaking down, the performance is already compromised, and we’ll give you the honest call on whether it’s safe to wait or time to swap the glass.
CGI Service in Pembroke Pines: What Local Conditions Mean for Your Equipment
Here’s the detail that actually shapes CGI work in Pembroke Pines: this city is in Broward County’s High-Velocity Hurricane Zone, so replacement windows and exterior doors have to meet Florida Building Code HVHZ requirements, including approved impact protection and the correct product approval for each opening. That’s not a preference; it’s the law. When we get called to a home in Chapel Trail or anywhere else in Pembroke Pines for our Window Installation in Pembroke Pines, the first question isn’t “Can we fix this?” It’s “Can we fix this and still meet code?” A fogged IGU we can replace, because the frame and glass package remain code-compliant. A welded seam that’s failed or a frame extrusion that’s twisted from a past storm is a different story. That unit may need to be swapped for a code-compliant impact assembly, regardless of what the homeowner would prefer. This is the decision guide you won’t find on a generic CGI page: which failures are repairable under HVHZ rules, and which ones trigger a mandatory impact replacement.
CGI Models & Products We Service in Pembroke Pines
We work on the CGI Series 3000 and 5000 single hung and double hung impact vinyl windows, horizontal roller and 3-lite sliding impact windows, fixed and casement impact units used in older Pembroke Pines communities, and aluminum impact entry and French door systems. For repairs, we stock and install quality aftermarket CGI-compatible rollers, weatherstrip, pile, balances, and glazing seal products. When a full replacement is needed, we use OEM or equivalent impact-rated sashes, glass, and door slabs. Most fogged or leaking CGI windows in Pembroke Pines can be repaired first, and only structurally failed or unrepairable frames go to replacement. If you’re checking whether your unit falls in the repairable category, call us before you buy a whole new window.
CGI Service Pricing in Pembroke Pines
What you’ll pay depends on what failed. Here are the ranges we typically see in Pembroke Pines:
- IGU glass replacement (impact-rated): $600 to $1,800 depending on size and glass package
- Weatherstrip and pile replacement on a single hung: $150 to $350 per window
- Horizontal roller and track hardware replacement: $200 to $500 per panel
- Perimeter sealant and flashing repair: $350 to $900 depending on access and linear footage
- Full impact window or door replacement: $1,800 to $6,000+ per opening, driven by product approval and installation scope
We write the price before work starts, and that written price is what you pay. No swing at the door. Call (682) 281-2168 for a free estimate on your specific CGI unit, and we’ll put the number in writing.
Serving Pembroke Pines, FL - Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Pembroke Pines
In most cases, yes. A fogged CGI impact window usually means the IGU seal has failed, and under Florida’s HVHZ code, replacing the glass unit with an impact-rated IGU keeps the existing frame compliant. You only need a full replacement if the frame itself is structurally compromised or has lost its product approval. Call (682) 281-2168 and we’ll inspect the specific unit and give you a written quote either way.
Almost always a repair. Flat or corroded roller wheels and worn stainless hardware cause most dragging CGI horizontal rollers, and swapping the rollers takes about an hour per panel. Full replacement only comes up if the track, frame, or glass is damaged. We can confirm with a quick look at the panel.
Yes, and it’s the single biggest factor in any repair-or-replace decision. Pembroke Pines is in Broward County’s High-Velocity Hurricane Zone, so replacement windows and exterior doors must meet Florida Building Code HVHZ requirements with approved impact protection and product approvals. Some repairs, like IGU swaps and hardware replacement, keep the original approval intact. Others trigger a code-compliant replacement.
No. We’re an independent service company. We’re not authorized, sponsored, or endorsed by CGI, and we don’t pretend otherwise. What that means for you is that our repair-or-replace advice isn’t driven by a manufacturer’s sales quota. We recommend the repair that makes sense and the replacement that meets code.
Worn weatherstrip, failed felt fin seals, and degraded pile on the bottom sash are the usual causes, especially after years of Broward County humidity and sun. Wind-driven rain finds the gaps and runs onto the sill. Replacing the weatherstrip and resealing the jambs fixes most leaks. For an exact quote on your leaking window, call (682) 281-2168 – estimates are free.
Service Areas Near Pembroke Pines
We serve Pembroke Pines and the surrounding Broward County communities. You’ll find us in Miramar, Weston, Davie, Cooper City, and Hollywood, plus we handle work farther out when the job calls for it. If you’re closer to CGI service in Oceanside or CGI service in Los Angeles, our team supports those areas too. Visit our Pembroke Pines service area page for full coverage details.
Book Your CGI Service in Pembroke Pines Today
We’ll inspect your CGI windows or doors, give you a written price before any work starts, and get the job done right the first time - including Cgi repair in Hialeah if that’s where you are. Call (682) 281-2168 to schedule your free estimate.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Pembroke Pines since 2001.