ECO Window Systems Door Replacement Nationwide | Juniper Windows & Doors

ECO Window Systems Door Replacement in Los Angeles: What to Know First

ECO Window Systems door replacement in Los Angeles typically runs $1,400 to $4,200 depending on the line, size, and whether you’re keeping the existing frame or replacing the full assembly. As an independent ECO Window Systems service provider, we handle everything from a single patio slider swap to full-home door replacement, and most single-door jobs are completed in one day once parts arrive. You’ll get a written price before any work starts, because that’s how we run every job in Los Angeles.

Call (682) 281-2168

This page is for Los Angeles homeowners who already own ECO Window Systems products and need a door replaced, not upsold. If you’re looking at a failing slider, a warped entry door, or a French door that won’t seal, call (682) 281-2168 and we’ll walk through what you’re seeing before we ever schedule a visit.

How ECO Window Systems Products Fail – and How We Fix Them

• ECO 4700 Slider Track Wear: The 4700 series slider runs on a bottom track that collects Los Angeles grit and dust faster than most homeowners expect. The rollers start grinding, the panel drags, and eventually the door feels like it weighs twice what it should. We replace the roller assemblies and re-align the track, and if the track itself is grooved beyond repair, we source a replacement rather than trying to polish a lost cause.
• ECO 4500 French Door Threshold Failure: The 4500 line has a low-profile threshold that looks clean but holds water when the drain channels clog. In Los Angeles, we don’t get much rain, but when we do, the water that pools against a clogged threshold wicks into the door’s bottom rail and starts corrosion you can’t see until the door sags. We pull the threshold, clear the drains, and replace the weatherstripping before reinstalling on a clean, sealed bed.
• ECO Vinyl Entry Door Warp at the Closer Side: South- and west-facing doors in Los Angeles take direct sun for hours a day, and ECO vinyl entry doors sometimes warp on the latch side from that repeated heat load. A door that won’t latch clean, or rubs the jamb at the top or bottom, is usually telling you this. We check the door’s plane with a straightedge before ordering a replacement, so you don’t get a new slab that just warps the same way.
• ECO Patio Door Glass Seal Failure (Fogged Lites): ECO insulated glass units occasionally lose their edge seal, especially on doors that face the morning marine layer in neighborhoods like Mar Vista or Playa del Rey. When the seal fails, moisture gets between the panes and you get that permanent fog. We replace the IGU itself, not the whole door, which saves you about 60% of the cost of a full door replacement.
• ECO Multi-Point Lock Misalignment: ECO swinging doors with multi-point locks are great when they’re right, but if the door settles even a couple of millimeters, the hooks and rollers stop engaging in sequence. You get one latch point working and two dead ones. We reset the striker plates and adjust the door in its frame, and if the gearbox inside the door is worn, we replace that rather than telling you the door is toast.

Our ECO Window Systems Door Replacement Process

Here’s what a door replacement with us actually looks like, from the first call to the final walkthrough:

1. 1
   Phone diagnostic: You call (682) 281-2168, a real person answers, and we ask about the door: brand, age, symptoms, what it’s doing. If you can send photos, great. If not, no problem. We’ll know more than enough to give you a rough price range on that first call.
2. 2
   In-person measurement and assessment: We come to your Los Angeles home, measure the opening exactly, check the floor for level, and pull any trim needed to see the rough opening behind the door. We also check whether the issue is the door or the house, because if the opening has settled, a new door won’t fix that.
3. 3
   Written price: You get a line-item quote on paper or by email before anything gets ordered. No estimate that turns into a surprise later. The number we quote for parts, labor, and any framing or stucco repair is the number you pay.
4. 4
   Parts sourcing: For ECO Window Systems doors, we use OEM parts when the door is still under warranty or when aftermarket parts don’t match the hardware profile. For out-of-warranty doors, we’ll offer quality aftermarket options where they save you real money, and we’ll tell you the trade-off in plain terms.
5. 5
   Installation day: We arrive with the new door, the tools, the shims, the flashing, and the patience to do it right. Old door comes out, opening gets inspected and prepped, new door goes in square and level, anchored and sealed with proper door flashing, not a tube of caulk and a prayer.
6. 6
   Test and cleanup: We cycle the door through its full range, check the reveal around all four sides, test the lock and latches, and verify it seals against draft. Then we clean up, show you what we did, and you get before-and-after photos and a digital invoice you can pay from a link. Every job carries the 365-Day Done Right Promise: if it’s not right, we make it right, parts and labor, for a full year.

What ECO Window Systems Door Replacement Costs in Los Angeles

You shouldn’t have to call anyone just to get a ballpark. Here’s what ECO Window Systems door replacement costs in Los Angeles on a typical job:

• Single ECO slider door replacement: $1,400 – $2,800, depending on size, glass package, and whether the frame is reused or replaced.
• ECO French door replacement (two-panel): $2,200 – $4,200, plus any threshold or subfloor repair if water got in before you caught it.
• ECO entry door replacement (single slab, no sidelites): $1,500 – $3,000, with the high end going to wider doors, custom colors, or upgraded hardware.
• ECO patio door glass replacement only (IGU swap): $500 – $1,100 per lite, which makes sense when the frame and hardware are still solid.

What moves the price: door size, whether we’re resetting a door that’s already in a good rough opening or pulling out a rotted frame, the hardware package, and which Los Angeles neighborhood you’re in (second-story jobs and tight access streets like parts of Silver Lake or the Hollywood Hills add a bit for labor). Call (682) 281-2168 and we’ll give you a real number in writing after we measure. Estimates are free.

Why Los Angeles Homeowners Call Juniper Windows & Doors for ECO Window Systems Work

Because we tell you the truth about the door. We don’t sell you a replacement when a hinge adjustment or roller swap fixes the problem, and we don’t band-aid a door that’s genuinely done. Sean Mackey has been doing windows and doors across Los Angeles for well over a decade, and he trained at Los Angeles Trade-Technical College with a focus on construction technology and building envelope fundamentals. That means the guy measuring your door understands air and water sealing, not just shims and screws.

Beyond ECO Window Systems, we also work with PGT, CGI, CWS, and ES Windows, so if your door replacement turns out to be an opportunity to upgrade to impact-rated glass because you’re in a wind zone, we’ll tell you that and show you the price difference. We don’t pad the answer just because we carry the product. Every job gets a written price before work starts, every tech is background-checked and uniformed, and the person who answers the phone at 2 a.m. when your door won’t close is a live human being, not a menu tree. The Relay Standard means you get a live arrival time, photo updates, and a digital invoice. The 365-Day Done Right Promise means if it’s not right, we make it right. In writing.

FAQs