Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Replacement Across Albany
Door replacement in Albany runs $1,400 to $4,800 for a standard pre-hung exterior unit with installation, with fiberglass entry doors from Therma-Tru landing between $2,200 and $3,800 on most Albany homes. That’s the honest range before anyone walks your property, because the actual number depends on your rough opening, the door you pick, and whether Albany’s design review process applies. Call (682) 281-2168 for a written line-item quote, and we’ll get a technician to your Albany block on a live arrival time you can track from your phone.
We’re the windows-and-doors arm of Relay Home Co., and we’ve handled enough Albany door jobs to know the difference between a quick slab swap on a 1950s rancher off Solano and a full pre-hung replacement on a hillside lot where the old jamb has been out of square since the Carter administration. Getting the measurement right on the first visit is the whole ballgame here, and Albany’s housing stock makes that harder than it looks on paper.
Why Juniper Windows & Doors Is Albany’s Preferred Door Replacement Company
Albany homeowners keep calling us back because we put the price in writing before the first screw turns. Not a vague estimate. A written quote with line items, covered by Juniper’s 365-Day Done Right Promise: parts and labor, in writing, for a full year after installation. If something isn’t right, Sean Mackey, who leads Juniper, makes sure we come back and fix it. No charge, no argument, no phone tag.
Every door we install in Albany gets handled by a background-checked, uniformed technician. You’ll know who’s walking up your front steps before they ring the bell, and you’ll get before-and-after photos of the whole install. That’s the Relay Standard: book in a tap, live arrival time, written price, digital invoice. If you call (682) 281-2168, a real person picks up every time, 24/7. No voicemail maze, no callback queue.
Door Installers in Albany
Door Installers in Albany handle everything from pulling the old unit to hauling away debris, and the job starts with the rough opening, not the old door’s face. A pre-hung replacement in Albany typically lands between $1,900 and $4,200 including disposal, depending on whether the existing frame can be reused or the rough opening needs to be re-squared. Homeowners usually call us when a door sticks, a jamb rots out at the bottom, or a draft in an older Albany tract home gets too obvious to ignore.
What We Check Before Quoting
We measure the rough opening in three places, check for out-of-square jambs, and look at the sill plate. Albany’s older homes, especially those built before 1960 along Solano Avenue and up toward the hills, frequently have jambs that shifted decades ago. Ordering a stock-size unit off those measurements means a misfit, so we verify everything before we ever order the door.
Sill and Flashing Details
Albany’s weather matters more than people expect. Wind-driven rain off the Bay finds its way under doors with old or missing sill pans, and once water wicks into the framing, the repair gets expensive. Our installers flash every sill pan and seal the threshold so water moves away from the opening, not into it.
Door Contractors in Albany
Door Contractors in Albany pull the building permit, coordinate any plan check at 1000 San Pablo Ave, and manage the full schedule from tear-out to final inspection. A permitted door replacement in Albany with a new header or changed opening size costs between $2,800 and $6,500 depending on framing work, and that’s the cost a homeowner should plan for when the job involves more than a slab swap. We handle the permit paperwork as part of every Albany job that requires one, and we’ll tell you upfront whether your project does.
Permit and Design Review Coordination
Albany’s Building Division runs a counter-based permit process out of City Hall, which makes plan checks faster than in most East Bay cities. But here’s the part most contractors won’t mention: if your door change is visible from the street in one of Albany’s older residential tracts, the city’s residential design review standards apply. That’s true in Albany and not true in Berkeley or El Cerrito. We factor that into the timeline and the price before we start.
Rough Opening Corrections
Albany’s aging housing stock means out-of-square rough openings are more common than not. A 1970s ranch off Solano, a hillside home near Albany Hill, or a bungalow near Marin Avenue: the jambs have moved. We correct the opening before we set the new pre-hung unit, so the door doesn’t sag six months after it swings for the first time.
Our crew recently replaced a failed 1970s wood jamb and rotting sill at a ranch-style home off Solano Avenue near the Albany Library. We swapped the old slab for a Therma-Tru fiberglass entry door with a laminated glass insert and low-E coating that cut the afternoon heat gain through the west-facing entry. We reset the rough opening, flashed the sill pan, and reused the existing trim line so the new door matched the home’s mid-century facade. The homeowner passed final inspection and noticed the front room stayed noticeably cooler the following week.
Trusted Brands We Service in Albany
Juniper carries eight product lines, and for Albany doors we recommend starting with Therma-Tru for fiberglass entry units, CGI and CWS for impact-rated options on wind-exposed lots, and ES Windows when the door includes a large glass assembly or sidelights. We keep parts for these lines moving through our Bay Area supply chain, so Albany customers don’t wait weeks for a threshold cap or hinge. The right door for an Albany hillside with direct Bay wind isn’t the same as the right door for a sheltered rancher near Gilman Street, and we’ll be direct about which product fits your exposure and your budget.
Common Door Replacement Problems We See in Albany Homes
- Out-of-square rough openings. Albany’s pre-1980 housing stock has settled. Jambs that weren’t shimmed correctly at construction have drifted, and a stock pre-hung door won’t sit flush. We correct the opening before the new door goes in.
- Rotted sill plates from missing flashing. Older Albany homes, especially those with original doors, often lack a proper sill pan. Water gets under the threshold, the framing rots, and the door starts dragging on one corner. We replace the rotted section and flash the new sill so it stays dry.
- Skipped permits now, sale problems later. Some Albany homes had door work done without a permit at some point in the past. When the seller goes to list, the missing permit surfaces. We pull the right permit now, get the inspection passed, and keep your future sale clean.
- Under-rated doors on windy hillside lots. Homes up on Albany’s slopes near the waterfront take wind-driven rain that a basic builder-grade door can’t handle. We check design pressure ratings and recommend a door that actually meets the exposure, not just one that fits the opening.
Pricing for Door Replacement in Albany, CA
Here’s what Albany homeowners should budget, and this reflects the local market, not national averages.
- Slab swap only (no frame replacement): $900 to $1,800
- Pre-hung fiberglass entry door, standard size: $2,200 to $3,800
- Pre-hung door with sidelights: $3,500 to $6,800
- Door replacement requiring header or rough opening correction: $3,800 to $8,200
- Interior door replacement, pre-hung: $500 to $1,200 per door
The biggest cost drivers in Albany are the rough opening condition, whether design review applies, and the glass package. A low-E laminated insert on an entry door adds $300 to $700 but cuts heat gain, which matters on west-facing doors like the one our crew replaced off Solano. Call (682) 281-2168 for a written quote, and you’ll have line items before you sign anything.
We Also Serve Cities Near Albany
Our crews handle Door Replacement across the East Bay, so if you’re in El Cerrito, Berkeley, Emeryville, or Richmond, the same written pricing and 365-Day Done Right Promise apply. For anything in Albany itself, see our Door Replacement in Albany service details, or just call (682) 281-2168 and ask for Sean’s team.
Serving Albany, CA - Our Local Coverage Area
We’re based in the Albany area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Albany
Yes, when the door isn’t a like-for-like slab swap and you’re changing framing, the rough opening size, or the door’s appearance from the street, Albany requires a building permit. It’s issued through the counter at 1000 San Pablo Ave, and any door changes visible from the street in older Albany tracts may also trigger residential design review. If you skip the permit, the door won’t be inspected for header sizing, flashing, or egress clearance, and it can complicate a later sale. We pull permits as part of our Albany jobs and tell you upfront whether yours qualifies. Call (682) 281-2168 and we’ll confirm the permit path before a single visit.
Most Albany door replacements take one full day on site once the door arrives, with one to three weeks of lead time for ordering, plus up to a week for permit plan check at Albany City Hall if design review applies. If the door is stock-size and no structural changes are needed, plan for a single-day installation. If the rough opening needs correction or the jamb is rotted, add a second day for framing and flashing. Call (682) 281-2168 for a schedule that matches the exact door and opening you’re working with.
The written quote we give you before starting covers everything we can see. What would change the price during an Albany job is what’s hidden behind the existing door. Rotted framing, a termite-damaged sill, an undersized header, or an out-of-square rough opening that needs structural correction will change the final line item. We photograph and document everything we find, show you the issue, and give you a written change order before touching it. We don’t surprise you at the end with a number on an invoice. Call (682) 281-2168 and ask about our fixed pricing and change order process before you choose a contractor.
We install Therma-Tru, PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux, and the glazing matters in Albany more than people assume. Homes on the western slopes and near the waterfront get direct afternoon sun and wind-driven rain, so a low-E laminated glass insert on an entry door cuts heat gain and handles debris impact better than a plain insulated unit. We’ll walk through U-factor and design pressure ratings in plain terms and recommend a door that fits your specific Albany exposure instead of defaulting to whatever’s cheapest in stock. Call (682) 281-2168 to talk through options with someone who knows the Albany microclimates.
For most Albany homes, we recommend a full pre-hung unit, because the existing jambs in older housing stock are rarely square or structurally sound enough to reuse. Replacing just the slab works when the jamb is level, plumb, and free of rot, which we sometimes see in newer construction along the lower flatland near the Bay. But in older tract homes off Solano or up on the hillsides, the jamb has usually moved or started to decay. We’ll inspect it, tell you honestly which approach your home needs, and quote the slab swap only if it’ll actually perform. Call (682) 281-2168 and we’ll check the opening before you order anything.
Written by Sean Mackey, Owner at Juniper Windows & Doors, a window and door replacement specialist serving Albany and the wider East Bay since 2001.










Before
After
Before
After
Before
After