Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Replacement Across Antelope
Door replacement in Antelope typically runs $950 – $2,800 for a standard exterior door and $3,200 – $7,500 for a full entry system with sidelights, depending on material, glass package, and frame condition. Most jobs take one day once the door arrives, with permitting through Sacramento County adding a few days on the front end. We’re Juniper Windows & Doors, and we’ve been replacing doors in Antelope long enough to know exactly what these homes throw at a door: afternoon wind gusts off the Sierra foothills, summer heat that warps hollow-core slabs, and jambs that quietly rot behind trim where nobody looks. Call (682) 281-2168 for a written quote before you buy anything.
Why Juniper Windows & Doors Is Antelope’s Preferred Door Replacement Company
Antelope homeowners keep calling us for one reason: we put the price in writing before work starts. No estimate that balloons at the door. No vagueness about what “might” be needed once the old frame comes out. Sean Mackey leads our team, and his rule is simple: scope the job correctly the first time, then stand behind it for a full year under the 365-Day Done Right Promise. If something isn’t done right, we make it right, parts and labor, in writing.
Our technicians are background-checked and uniformed, so you know who’s walking through your door before they knock. When you book, you get a live arrival time you can track, before-and-after photos of the work, and a digital invoice you can pay from your phone. That’s the Relay Standard, and it’s how every Juniper job runs, including right here in Antelope.
We also answer the phone. A real person, 24/7. When you’re standing in front of a door that won’t latch and the wind is howling, you don’t want a callback queue.
Door Contractors in Antelope
Door Contractors in Antelope handle the full replacement: removing the existing slab and frame, inspecting the rough opening for square and plumb, replacing rotted jamb material, installing the new pre-hung unit, insulating and sealing the perimeter, and re-trimming both sides. A licensed contractor in Sacramento County also handles the permit, which is required for exterior door replacement when the opening or framing changes. Expect $950 – $2,800 for a standard single entry door installed, with higher-end fiberglass units from Therma-Tru landing between $2,200 and $4,500 with glass upgrades.
Pre-Hung vs. Slab Replacement
If your existing frame is square, dry, and solid, a slab replacement swaps just the door panel and runs on the lower end of that range. If the jamb is rotted or the opening is out of square, which we see frequently on older Antelope homes built in the late 80s and 90s, you need a pre-hung unit. That costs more, but it’s the difference between a door that seals and one that binds every July.
When Antelope Homeowners Call Us
Most calls start with a door that sticks, a draft you can feel from across the room, or visible rot at the bottom corners. Others follow a break-in attempt or a door that simply won’t latch anymore. Whatever the trigger, the fix starts with a free on-site measurement and a written line-item quote. We never start cutting before you approve the number.
Door Frame Repair in Antelope
Door Frame Repair in Antelope addresses the structural wood around the door: jambs, threshold, brickmold, and the hidden framing behind the trim. Sacramento County’s hot, dry summers followed by wet winters create exactly the conditions that rot door frames, especially on north-facing entries that stay damp and shaded. Expect $250 – $600 for a jamb leg repair, $400 – $900 for a full jamb and threshold replacement, and $800 – $1,500 if the rough opening framing itself needs reconstruction. These repairs are usually done as part of a full door replacement, not as a standalone patch.
Jamb Rot and Threshold Failure
Rot starts where water pools, which in Antelope means the bottom corners of the jamb and under the threshold. By the time you see peeling paint or a soft spot, the damage usually runs deeper than the surface. Our crews cut back to solid wood, treat the surrounding area with a borate preservative, and rebuild with pressure-treated stock before installing the new door.
When Repair Beats Replacement
If the door slab itself is still solid and square, frame repair alone can buy you another five to ten years. We’re honest about this. If the slab is warped, delaminating, or hollow-core and facing Antelope’s wind exposure, replacement often makes more financial sense. We’ll tell you which path we’d take if it were our own house.
Trusted Brands We Service in Antelope
Juniper installs and services Therma-Tru, PGT, CGI, and ViewLux door systems, which means Antelope customers get access to wind-rated fiberglass entry doors, impact-rated glass options, and modern sightline designs without drive time to Sacramento showrooms. We keep common hardware, weatherstripping, and threshold components on our trucks, so most service calls and replacements don’t stall waiting on parts. If your existing door came from another manufacturer, we can still handle the replacement. Our team works across eight product lines, giving us flexibility to match the right door to your opening, exposure, and budget rather than forcing whatever is in stock.
Common Door Replacement Problems We See in Antelope Homes
- Wind-driven air infiltration: Antelope sits on Sacramento County’s wind-prone eastern edge, where afternoon gusts routinely exceed 30 mph. Doors without adequate weatherstripping or a solid threshold let that wind whistle through, which is why we recommend heavier-gauge frames and high-performance seals on every outward-facing entry.
- Warped hollow-core slabs: Summer heat and low humidity dry out cheap door panels, causing them to bow and refuse to latch. By August, we see doors that fit fine in March but won’t close without a shoulder. A solid or engineered core door eliminates the problem entirely.
- Hidden jamb rot behind trim: The trim looks fine. The jamb underneath is gone. This is the most common surprise on Antelope homes built before 2000, and it’s exactly why we never install a new door without first pulling the interior casing to inspect the framing. Skipping this step just buries the problem for another five years until the whole assembly fails.
- Undersized design pressure ratings: A door rated for a sheltered Sacramento side street may not hold up on an exposed Antelope lot near open fields or the creek corridors. We check the design pressure requirement for your specific exposure before recommending a unit, because installing a door that can’t handle the site’s wind load fails within a season or two.
Pricing for Door Replacement in Antelope, CA
Here’s what Antelope homeowners actually pay with Juniper. A standard entry door replacement runs $950 – $2,800 installed. A fiberglass door from Therma-Tru with a glass insert lands between $2,200 and $4,500. Full entry systems with sidelights start around $3,200 and can reach $7,500 with premium glass packages and hardware. What moves the number? Whether the frame needs rebuilding, whether the door requires a higher design pressure rating for your wind exposure, and what glass package you choose. Every quote is written, line by line, before any work begins. You’ll see the material, labor, permit fee, and disposal cost broken out separately. Call (682) 281-2168 and we’ll schedule a free on-site measurement and quote.
We Also Serve Cities Near Antelope
Our Door Replacement crews work throughout the northern Sacramento suburbs. Beyond Antelope, we regularly serve homeowners in North Highlands, Elverta, Rio Linda, and Citrus Heights. If you’re a few blocks outside the Antelope line, chances are we already have a crew scheduled nearby.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Antelope
Yes, Sacramento County requires a building permit for exterior door replacement when the opening or framing is altered, which covers nearly every full replacement job. Juniper pulls the permit, schedules the inspection, and handles passing it. The permit fee typically runs $150 – $350 depending on the scope, and we line-item it in your written quote. Call (682) 281-2168 and we’ll confirm exactly what your project requires.
Once the door arrives and the permit is approved, most replacements in Antelope are done in a single day. Custom-ordered doors add two to four weeks for manufacturing, and permit approval through Sacramento County usually takes a few business days. Plan for about one month from signed quote to finished installation on a standard project. We’ll give you a firm calendar at the quote, not a vague “soon.”
Juniper installs Therma-Tru, PGT, CGI, and ViewLux as our primary door brands, with access to eight product lines total. For Antelope’s wind exposure, we typically recommend Therma-Tru fiberglass or PGT impact-rated units on exposed entries. The right brand depends on your specific opening, sun exposure, and security needs, and we’ll walk you through the tradeoffs in plain language before you decide.
Antelope gets hit with afternoon wind off the Sierra foothills that regularly exceeds 30 mph, which means door systems here need heavier frames, better weatherstripping, and correct design pressure ratings to avoid rattling and air leaks. This is the biggest difference between replacing a door in Antelope versus a sheltered Sacramento neighborhood. We spec every door for the specific wind exposure of your lot, and that’s part of the written quote, not an upsell. Call (682) 281-2168 for a free on-site assessment.
Standard exterior door replacement in Antelope runs $950 – $2,800 installed, fiberglass doors with glass from $2,200 – $4,500, and full entry systems with sidelights from $3,200 – $7,500. Frame repair adds $250 – $900 depending on how much rot we find. Every quote is written and itemized before work starts, so you’ll never see a number change at the door. Estimates are free; call (682) 281-2168 to schedule yours.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Antelope with door replacement and installation.