Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Replacement Across Georgetown
Door replacement in Georgetown, CA typically costs between $900 and $2,800 for a standard fiberglass entry door, installed. Historic homes along Main Street and the surrounding gold-rush-era streets often push that higher, usually $2,100 – $4,500, because the rough openings are rarely square and the original fir jambs are frequently rotted at the sill. We schedule Georgetown jobs with a real arrival window you can track, a written price before any work starts, and a 365-day parts-and-labor guarantee in writing. Call (682) 281-2168 to get your free estimate started today, or learn more about our Window Installation in Georgetown.
Why Juniper Windows & Doors Is Georgetown’s Preferred Door Replacement Company
Georgetown homeowners don’t have time for a contractor who quotes one number over the phone and shows up with a different one. Every job we do gets a written price before the first screw turns, backed by the 365-Day Done Right Promise: if it’s not right, we make it right, for a full year after installation. That matters here because Georgetown’s older homes throw curveballs. A door that looked like a standard 36×80 on a tape measure can demand hours of jamb correction once the old frame comes out.
We’ve pulled failing doors off 1920s cottages off Main Street and 1800s-era miner’s cabins alike. The common thread: settling has knocked rough openings out of plumb, and someone installed a pre-hung door without correcting it. Air leaks around the frame, the deadbolt binds, the threshold heaves after the first freeze-thaw cycle. Our techs measure, sister in new jamb stock when needed, re-square the opening, and only then set the door. It takes longer than a swap. It’s also why our doors in Georgetown close flush and seal tight five years later.
We’re led by Sean Mackey, and every technician who walks onto your Georgetown property is background-checked and uniformed. You know exactly who’s at your door. And when you call (682) 281-2168, a live person picks up. Day or night.
Door Contractors in Georgetown
Door contractors in Georgetown do far more than hang a slab on hinges. On the town’s older housing stock, a proper door replacement starts with demolition: pulling the old door, casing, and jamb to see what’s behind them. We check for rot in the sill and jamb legs, verify the rough opening is square and the correct depth for your wall framing, and build back from there. Standard exterior door replacement in Georgetown runs $900 – $2,800; historic work with custom fitting runs $2,100 – $4,500.
Full Entry System Replacement
When the jamb is too far gone to save, we remove the entire unit and replace it with a pre-hung Therma-Tru or PGT system. In Georgetown, 2×4 framing on older walls versus 2×6 on newer additions changes jamb depth, so we verify wall thickness before ordering. A mismatched jamb leaves trim gaps and a door that binds.
Historic Door Remediation
Georgetown’s gold rush era homes rarely have square openings. We sister new jamb stock, plane and shim to correct for settling, and set the door so the reveal is even all around. Skipping this step is the number one reason Georgetown homeowners feel a draft through a brand-new door.
Door Frame Repair in Georgetown
Door frame repair in Georgetown usually costs $350 – $800 for localized jamb or threshold work, and more if rot extends into the subfloor or framing. Georgetown’s freeze-thaw cycles at elevation are hard on door sills: water seeps into hairline sealant cracks, freezes, expands, and heaves the threshold. The damage hides until the wet season shows a soft sill or a door that suddenly drags.
Rotted Sill and Jamb Replacement
We cut out rotted sections, treat the surrounding wood, and sister in new jamb stock or a composite sill. On older Georgetown homes with the original fir jambs, partial repair often saves the casing and interior trim, which keeps the character intact and the cost down.
Threshold Realignment and Sealing
Georgetown’s elevation means thresholds heave and crack every few winters. We replace the threshold, shim the frame level, and seal the exterior with a high-performance polyurethane caulk rated for temperature swings. It stops water wicking into the jamb leg before it starts.
Trusted Brands We Service in Georgetown
We install and service thermatru fiberglass entry systems, PGT impact-rated doors, and ViewLux multi-point locking doors in Georgetown. If you already have one of these products and the frame has shifted or the threshold has rotted, we stock common parts for repair rather than forcing a full replacement. Georgetown’s historic homes also respond well to fiberglass doors from Therma-Tru: they carry a wood-grain texture that reads as historic from the street, but they won’t warp or rot the way the original fir did. Impact-rated glass from PGT makes sense for west-facing doors up here, where afternoon sun and wind can be relentless.
Common Door Replacement Problems We See in Georgetown Homes
- Non-square rough openings from settling. Many Georgetown homes built between the 1850s and 1920s have shifted enough that a stock pre-hung door won’t sit flush. We correct the opening before installation so the door seals tight.
- Rotted original fir jambs. The sill corner under the deadbolt is the first to go. Georgetown’s freeze-thaw cycles drive water into the end grain, and 100-year-old fir doesn’t fight back well.
- Heaved thresholds from cold winters. At Georgetown’s elevation, sealant cracks when the ground freezes and thaws. Water gets under the threshold, freezes again, and lifts it. The door then drags or won’t latch.
- Wrong jamb depth for wall thickness. Older Georgetown homes are often 2×4 framing with plaster walls, while additions are 2×6. Ordering a door without confirming wall depth leaves the jamb proud of or shy of the interior trim.
Pricing for Door Replacement in Georgetown, CA
A standard fiberglass entry door replacement in Georgetown runs $900 – $2,800. Historic homes with rotted jambs and out-of-square openings run $2,100 – $4,500 for the full remediation and installation. Door frame repair alone, without replacing the slab, is typically $350 – $800. The big cost drivers here are jamb repair, rough-opening correction, and whether you need a custom-size door versus a standard 36×80. We give every Georgetown homeowner a written line-item quote before ordering anything, and that number doesn’t change unless you change the scope. Call (682) 281-2168 to schedule your free estimate.
We Also Serve Cities Near Georgetown
Our Door Replacement team serves Georgetown and the surrounding foothill communities, including Placerville, Pollock Pines, Diamond Springs, and Auburn. Each crew arrives from our metro scheduling hub with live arrival tracking and the same written-price guarantee we give Georgetown homeowners. Wherever you’re located in El Dorado County, you get the same standard: a locked price before work begins and a full year of coverage if anything isn’t right.
Serving Georgetown, CA - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Georgetown
In most cases, swapping an existing exterior door for a new one in the same rough opening does not require a permit in Georgetown. What changes that: if you’re enlarging the opening, adding a new opening where one didn’t exist, or if the door is on a historic structure with local preservation review. We’ll confirm current Georgetown building requirements before starting your job, and if a permit is needed, we handle the paperwork for you. Call (682) 281-2168 for a free estimate and we’ll walk you through the specifics for your home.
A straightforward replacement with a sound frame typically takes one day. On Georgetown’s older homes where the jamb needs repair or the rough opening needs correction, plan for one to two full days. The extra time isn’t padding; it’s the jamb restoration and re-squaring that makes the door actually seal. We’ll give you a written timeline with your quote so you know the exact plan before we start.
The condition of the existing jamb and rough opening is the biggest cost driver in Georgetown. If the original fir jamb has rotted through at the sill, we’re sistering in new jamb stock and re-squaring before hanging the door. That labor and material adds $400 – $900 over a basic swap. A custom-size door for a non-standard historic opening adds more. We’ll itemize every dollar in your written quote before ordering anything.
Yes. Georgetown’s gold rush era homes often have distinct panel profiles, trim details, and hardware that owners want to preserve. We source fiberglass doors with wood-grain textures that read as historic from the street, paint or stain them to match your existing palette, and reuse salvaged hardware where the original can be safely retained. If you want the character to stay and the drafts to go, we can do both. Call (682) 281-2168 to talk through the options.
Your written price only changes if the scope changes. In Georgetown, the most common reason scope changes after demo is discovering more rot than visible behind the old jamb, or finding that the rough opening is more out of square than the initial measurement suggested. We document everything with before-and-after photos, and we won’t order additional work without your signed approval first. That’s the written-price standard, and it applies to every Georgetown project.
Written by Sean Mackey, Owner at Juniper Windows & Doors.