Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Replacement Across Gilroy
A front door replacement in Gilroy typically runs $1,900 to $5,800 depending on the door slab, frame condition, glass package, and whether the rough opening needs structural correction. Entry doors with sidelites or transoms land higher, and older downtown homes frequently need jamb rebuilding before the new unit can be set. We schedule Gilroy jobs in half-day or full-day blocks with a locked written price before any work begins, and our crews carry the materials needed to handle the split housing stock you find across this city. Call (682) 281-2168 to get your estimate on the books.
Why Juniper Windows & Doors Is Gilroy’s Preferred Door Replacement Company
We are the windows-and-doors specialist inside the Relay Home Co. family, founded in 2001, and we also handle our Window Installation in Gilroy. Door replacement is what we do, and we do not drift into kitchens, baths, or roofing. That focus means our estimate for your Gilroy street reflects the wall and framing reality of the specific house, not a generic California door quote.
Sean Mackey leads our team, and every Gilroy job is booked with a live person on the phone, 24/7. You get a background-checked, uniformed technician, a live arrival time you can track, and before-and-after photos of the completed work. No voicemail maze, no four-hour window, no quote that shifts when the door comes off the hinges.
Gilroy homeowners tell us the same thing: they want the price written down and they want the work done correctly without babysitting a contractor. That is exactly how we run it. The 365-Day Done Right Promise covers the installation in writing, parts and labor, for a full year. If something is not right, we return and make it right, no charge, no argument.
Door Installers in Gilroy
Door Replacement installers in Gilroy handle the full scope: removing the old slab and frame, inspecting and rebuilding the rough opening, setting the new pre-hung unit on a sill pan, flashing the perimeter, sealing with low-expansion foam, and trimming out both sides. A standard single entry door install in Gilroy runs $450 to $1,100 in labor when the opening is square and nothing hidden shows up. When the jamb bottom is soft or the rough opening is out of square, as we often see on pre-1970 downtown homes, labor climbs to $1,200 to $2,400 because the framing has to be corrected before the new unit goes in.
Entry Door Installation
This is the most common door replacement call we run in Gilroy. We pull the old door, verify the rough opening dimensions, address any rot or sag, and set the new unit plumb and square before insulating and trimming. The labor range above covers most single-door entries.
Sidelite and Transom Work
Adding or replacing a sidelite or transom changes the wall, not just the opening. In Gilroy, that means structural headers, permit review, and inspection. This is a larger job with a larger price, and we will tell you that before anything starts, in writing.
Door Contractors in Gilroy
Door Contractors in Gilroy go beyond a swap: they scope the opening, check the threshold pan, verify the flashing, and determine whether the wall modification needs a building permit. That is the work we do on many Door Replacement in Gilroy projects, especially on older downtown streets where openings are commonly out of square by half an inch or more. A contractor-level scope that includes rough-opening correction, flashing replacement, and trim on a pre-1970 Gilroy home typically runs $2,800 to $5,800 all in, depending on door slab and glass selection.
Rough Opening Correction
This is the difference between a door that latches with one push and a door that binds at the top corner and whistles in a south wind. We cut out the rot, shim and reframe as needed, and rebuild the opening so the new unit sits plumb, square, and flush.
Flashing and Threshold Replacement
If we do not fix what let water in the first time, the new door fails in a few seasons. Gilroy’s winter rain finds the same path every year. Sill pans, flexible flashing, and low-expansion foam are standard on every exterior door we set.
Trusted Brands We Service in Gilroy
We install and service entry doors and glazing from ViewLux, Therma-Tru, PGT, and CGI, with access to eight product lines across the Relay Home Co. network. For Gilroy homeowners replacing west-facing entries, we check SHGC before specifying low-E glass so the summer afternoon sun does not turn your entry into a heat box. Local parts availability from Bay Area distribution keeps turnaround tight, and we can quote these brands accurately because we install them daily, not occasionally.
Common Door Replacement Problems We See in Gilroy Homes
- Rusted threshold pans on 1990s Eagle Ridge and Glen Loma homes. The original builder-grade thresholds were thin metal, and twenty-plus years of Gilroy rain has eaten through. The door slab might be fine, but the pan underneath is shot, and that is where the leak starts.
- Out-of-square rough openings on pre-1970 downtown homes. Older framing settles, and stock door slabs do not fit. The opening must be measured, not assumed. A half-inch out of square is enough to make a new door bind.
- Wind-driven rain intrusion around sidelites on Wren Avenue and similar 1990s two-stories. The original flashing was often a strip of builder felt and a prayer. We replace it with a proper sill pan and flexible flashing, and the entry hall stops whistling.
- West-facing entries baking in summer afternoons. Glass specification matters in Gilroy. A west-facing door with standard low-E still collects heat. We check SHGC so the glass works for the orientation, not against it.
Pricing for Door Replacement in Gilroy, CA
A standard single entry door replacement in Gilroy runs $1,900 to $3,800 for a mid-range Therma-Tru or ViewLux door with new hardware, weatherstripping, threshold, and trim. Add a sidelite or transom and expect $3,500 to $5,800. If the rough opening needs correction, add $600 to $1,400. Impact-rated PGT or CGI doors run higher, typically $3,800 to $7,000 installed. What changes the price: the condition of the framing underneath, the glass package, the hardware, and whether the wall itself is being modified. We write every number down before work starts. Call (682) 281-2168 for a free estimate, and you will have the range and the exact line items in writing.
We Also Serve Cities Near Gilroy
Our crews serve Gilroy and the surrounding South Bay communities, including San Martin, Morgan Hill, Los Gatos, and Campbell. If you are just over the line, we still run the same written-price standard and the same 365-Day Done Right Promise. Call us and we will confirm coverage for your street.
Serving Gilroy, CA - Our Local Coverage Area
We’re based in the Gilroy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Gilroy
A door replacement in Gilroy starts with measuring the rough opening, not the old slab. We then pull the old door and frame, inspect the jamb bottom and threshold pan, correct any rot or sag in the framing, set the new pre-hung unit on a sill pan, flash the perimeter, seal with low-expansion foam, and trim both sides. On older downtown homes the framing correction is the step that separates a door that lasts from a door that fails in two winters. Call (682) 281-2168 to schedule a free estimate and we will scope your specific opening.
In Gilroy, a like-for-like door swap in the existing opening generally does not require a permit. Modifying the wall for a sidelite or transom does. We handle the permit application and coordinate inspection on any job that requires it, and we will tell you during the estimate whether your project triggers that requirement. Call us and we will confirm for your specific property.
A standard single entry door replacement in Gilroy is usually a single-day job, roughly four to six hours on site. A project with rough opening correction, sidelite modification, or transom work typically runs one to two days. We set the schedule at the estimate so you are not left wondering when the crew shows up.
We install Therma-Tru, ViewLux, PGT, and CGI door systems, with access to CWS, ES Windows, ECO Window Systems, and Mr-Glass through the Relay Home Co. network. For Gilroy’s summer heat, we check SHGC on any glass package so a west-facing entry is not a greenhouse by July. Call (682) 281-2168 and we will walk through which brands fit your opening and your budget.
On a Gilroy door replacement, the two honest variables are hidden framing damage and wall modification. If the jamb bottom is rotted or the rough opening is significantly out of square, that work adds $600 to $1,400 and is not always visible until the old frame is out. Wall modifications for sidelites or transoms change both scope and permit requirements. We surface these issues during the estimate whenever possible, and if something hidden shows up, we show you photos and get written approval before proceeding. The price never moves without you approving it first.
Schedule Your Door Replacement in Gilroy
You should not have to call four contractors to get a straight answer about what door replacement will cost in Gilroy. Call (682) 281-2168 now and you will get a real person, a free estimate, and a written line-item price before any work begins. Sean Mackey and the Juniper Windows & Doors team are ready to scope your opening, confirm the right door for your house and street, and get the job done correctly. The 365-Day Done Right Promise covers every installation, in writing, parts and labor, for a full year.
Written by Sean Mackey, Owner at Juniper Windows & Doors. We serve Gilroy and the surrounding South Bay with written pricing, live arrival times, and the 365-Day Done Right Promise on every door we replace.










Before
After
Before
After
Before
After