Door Replacement in Irvine - Free In-Home Measure, Written Price

Fast, Reliable Door Replacement Across Irvine

Replacing an entry door in Irvine usually runs between $1,800 and $5,400 for a standard fiberglass or steel door with hardware, and most jobs finish in a single day. That’s the number homeowners ask us about first, so we’ll put it right here before anything else. Juniper Windows & Doors handles the entire process: removing the old door, prepping the frame, installing the new slab, sealing against Irvine’s dry summer heat, and hauling away the old unit. If you live near Woodbridge or Northwood and your door sticks, sags, or lets daylight through the weatherstripping, call (682) 281-2168 and we’ll give you a written price before any work starts.

Call (682) 281-2168

Why Juniper Windows & Doors Is Irvine’s Preferred Door Replacement Company

We work around Irvine’s residential patterns every week, and we know what this city’s homes demand from a door. Many neighborhoods here – from University Park to Westpark to Quail Hill – were built in concentrated phases from the 1970s through the early 2000s, which means a lot of original doors are now hitting the same failure points at roughly the same time: warped slabs, tired hinges, and weatherstripping that crumbled in the Santa Ana winds. Our crews arrive with the right tools and a written scope of work already in your hands, not a vague estimate that changes when we pull up.

Every Juniper technician is background-checked and uniformed, so you’ll know exactly who’s walking up to your front door. We answer our phones with a real person around the clock, and we coordinate our Irvine scheduling directly, so homeowners never sit through a four-hour arrival window. When you book, you get The Relay Standard: a live arrival time you can track, before-and-after photos of the finished job, and a digital invoice you can pay from your phone.

The name Juniper comes from a hardy evergreen that handles sun, wind, and drought without complaint – which is a fair description of what an Irvine entry door has to withstand. Sean Mackey, who leads our team, has built the company around one promise: if the work isn’t done right, we make it right for 365 days, parts and labor, in writing.

Door Contractors in Irvine

Door Contractors in Irvine generally fall into two camps: general remodelers who will take on a door as part of a larger job, and specialists like us who focus only on windows and doors. We fall firmly in the second group. A door replacement in Irvine means pulling the old slab, checking the rough opening for square and level, addressing any rot or settlement at the threshold, installing the new door with fresh hardware, and sealing everything up so Irvine’s midday heat stays outside. Expect a standard single entry door with fiberglass or steel construction to run $1,800 to $3,800 here, while front doors with decorative glass or impact-rated panels climb into the $4,500 to $6,000 range.

Entry Doors and Front Doors

Front doors in Irvine carry real curb appeal weight, especially in communities with strict HOA exterior guidelines. We help homeowners navigate those restrictions, whether you’re in a Turtle Rock tract with specific paint palettes or a newer Portola Springs development with its own architectural review board. A factory-finished fiberglass door from Therma-Tru or ViewLux gives you the wood look without the constant maintenance Irvine’s UV exposure requires.

Sliding Patio and French Doors

Sliding glass doors throughout Irvine take a beating from direct afternoon sun on the west-facing rear walls of single-family homes. We replace worn rollers, bent tracks, and failed seals on existing units, or install a complete new patio door system when the frame has racked out of square. French door replacements in Irvine often come up when homeowners want better sightlines to a backyard or need to address leaks that show up after winter rain.

Door Frame Repair in Irvine

Door Frame Repair in Irvine most often involves the bottom corners of exterior door frames, where years of irrigation overspray and the dry-wet-dry cycle in our clay-heavy soils create splintering and soft spots. We cut out the compromised section, splice in new wood or composite material, and re-hang the door so it latches cleanly. Minor frame repairs run $300 to $700 for a single corner; a full frame replacement around an exterior door typically lands between $900 and $1,800 depending on trim, siding integration, and whether the threshold also needs rebuilding.

Rot and Water Damage Repair

Irvine’s June gloom and occasional winter downpours mean water sits against door frames longer than the stucco and paint can handle. Left alone, that moisture wicks upward and softens the structural wood. We repair or replace the affected framing, then seal and flash the opening so water sheds away from the house instead of pooling at the base.

Threshold and Weatherstripping Replacement

A sagging threshold or flattened weatherstripping shows up as a visible gap of light along the bottom of the door – common in older Irvine homes where doors have settled over two or three decades. Replacing the threshold and adding a Q-Lon or compression seal stops drafts, keeps dust out on windy days, and quiets a rattling door. Expect this job to cost $250 to $500 including parts and labor.

Trusted Brands We Service in Irvine

We stock and install several trusted product lines that match Irvine’s climate and architectural styles, including PGT, CGI, and ViewLux service in Irvine. If you already have one of these brands in your home, we can service it – and because we keep local parts inventory for common failure points, turnaround on replacements in Irvine is faster than ordering from a distributor each time. CGI offers impact-rated door systems for homeowners who want maximum protection during wind events without giving up a modern look. PGT’s WinGuard line combines laminated glass with reinforced frames, and ViewLux is a frequent choice for contemporary Irvine homes where clean sightlines and low-maintenance finishes matter most.

Common Door Replacement Problems We See in Irvine Homes

• Sun-baked fiberglass and faded finishes. West-facing doors in neighborhoods like Westpark and Woodbury take direct afternoon sun for 300-plus days a year. Faded factory finishes and surface cracks are common by the ten-year mark, which is when replacement makes more sense than repainting for the third time.
• Settlement-driven frame misalignment. Irvine’s clay soil expands and contracts with moisture, and over time that movement causes door frames to drift out of square. Doors start sticking at the top corner or swinging open on their own, and no amount of hinge adjustment will fully correct a frame that has racked.
• Failed weatherstripping from Santa Ana dust and wind. The same dry winds that push eucalyptus debris across Irvine also wear down door seals. Worn weatherstripping lets conditioned air escape, which you’ll notice as warmer rooms near the entry and a higher electric bill during summer peak rates.
• Old sliding glass doors with blown-out rollers. Many Irvine patio doors were contractor-grade aluminum from the original build, and their rollers were never meant to last 25 years. When the door starts dragging or jumping the track, the fix is often a full replacement rather than rebuilding a track system that’s already tired.

Pricing for Door Replacement in Irvine, CA

We Also Serve Cities Near Irvine

Our crews regularly drive to Tustin, Santa Ana, Orange, and Villa Park for Door Replacement projects, and we bring the same written pricing and live arrival time to every job. If you’re in one of those cities, our Irvine scheduling team can have a technician out quickly. We also handle Window Replacement in Irvine and Window Installation in Irvine if your project extends beyond the door itself.

FAQs About Door Replacement in Irvine