Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Replacement Across Rialto
Door replacement in Rialto typically costs between $475 and $2,800 depending on whether you’re swapping an interior slab or doing a full exterior unit with reframing. Most interior door work runs $475 to $1,100, while exterior doors with jamb replacement land between $1,400 and $2,800. We’re Juniper Windows & Doors, and we handle both on a single visit. Call (682) 281-2168 for a written estimate before anything starts.
What makes Rialto work different from Fontana or Grand Terrace is simple: the housing stock. We’ll get into that below, but the short version is that most homes here were built between 1950 and 1975, and those original door openings are smaller than what today’s standard door slabs assume. That changes the scope, the cost, and the timeline. We plan for it up front so the written price we give you is the price you pay.
Why Juniper Windows & Doors Is Rialto’s Preferred Door Replacement Company
Our service area includes every Rialto neighborhood we know by name: Las Colinas, the Rancho Verde corridor, the flats west of Cedar Avenue, and the older tract streets running up toward the 210. We coordinate scheduling from our Inland Empire office, which puts our crews about 20 to 30 minutes from most Rialto addresses. When a homeowner near Rialto Avenue calls, we answer live, 24/7, and we show up with a real arrival time you can track.
Sean Mackey leads our team, and he’s built the operation around one rule: every job gets a written price before a single screw turns. A Rialto homeowner shouldn’t have to wonder whether the quote will change once the jamb comes off. It won’t. That’s not marketing language. It’s the 365-Day Done Right Promise, in writing on every project: if something isn’t right for a full year after installation, we come back and fix it, parts and labor included.
Our technicians are background-checked and uniformed. You’ll know exactly who’s walking through your door, and you’ll get before-and-after photos of the work, plus a digital invoice you can pay from a link. That’s the Relay Standard on every Rialto job, whether we’re swapping a bedroom door or reframing an entryway.
Interior Door Replacement in Rialto
Interior Door Replacement in Rialto usually means pulling an old hollow-core slab or a damaged solid-core door and putting a new one on the same hinges, assuming the jamb is sound. In Rialto’s mid-century tract homes, that assumption matters more than anywhere else. Most original openings are 2’8″ wide by 6’8″ tall, which is smaller than the 2’10” or 3’0″ widths common in newer construction in Rancho Verde or Lytle Creek Ranch. If the jamb is square and undamaged, we can replace the slab for $475 to $800 on average. If the jamb is out of plumb or has been shimmed badly over the years, the job becomes a jamb replacement and runs higher.
When the Slab Alone Won’t Save It
We see a lot of Rialto interiors where the original jamb is cracked at the hinge mortises or the door has been planed so many times it no longer closes cleanly. Swapping the slab onto a failing jamb just transfers the problem. We’ll tell you honestly if the jamb needs to come out, and we’ll price the full replacement before we start, not after.
Matching Mid-Century Hardware and Trim
Rialto’s older homes often have specific trim profiles and door casing styles that big-box stores don’t carry. We match the existing casing width and style when we install, so the new door doesn’t look like an obvious retrofit. For homes near Riverside Avenue with original wood veneer doors, we can source solid-core replacement doors with matching grain patterns.
Interior Door Installation in Rialto
Interior Door Installation in Rialto covers the full scope: new jamb, new slab, casing, hardware, and paint-ready trim. This applies when a homeowner is finishing a garage conversion, adding a bedroom, or turning a hallway closet into a pantry. In Rialto, a full interior door installation with a prehung unit runs $650 to $1,100 per opening for standard sizes. Wider openings, custom heights, or solid-core upgrades push that toward the higher end.
Prehung Units for Older Openings
We use prehung doors whenever possible because they arrive as one square assembly: jamb, hinges, and slab already aligned. For a 1950s home off of Foothill Boulevard, that means we can correct for years of settling without fighting an old, warped frame. We set the new jamb plumb, insulate behind the casing, and trim it out clean.
Hardware and Finish Options
What goes on the door matters as much as the door itself. We install ball-bearing hinges, solid passage sets, and privacy hardware for baths and bedrooms. Most Rialto homeowners choose a satin nickel or matte black finish, and we’ll walk you through what holds up best in our dry Inland Empire air, which tends to be kind to finishes compared to coastal homes, but rough on hollow-core doors that dry out and rattle over time.
Trusted Brands We Service in Rialto
Juniper Windows & Doors carries access to eight product lines, and for Rialto door projects we lean most often on Therma-Tru for exterior entry doors, PGT for impact-rated and high-wind units, and ES Windows when a client wants clean, modern sightlines. We stock common Therma-Tru weatherseal kits and PGT hardware sets locally in the Inland Empire, which shortens turnaround for Rialto customers who don’t want to wait on a parts shipment. Every brand we install is covered by our 365-Day Done Right Promise on top of the manufacturer’s warranty, so a misaligned strike plate or a sagging hinge at month ten gets fixed at no charge.
Common Door Replacement Problems We See in Rialto Homes
- Undersized rough openings from original construction. Most mid-century Rialto tract homes were framed for 2’8″ doors. A standard 2’10” slab from a home center won’t fit without cutting and reframing. We measure the rough opening first, not the old door, so the quote is accurate the first time.
- Warped jambs from decades of Inland Empire heat cycles. Rialto summers push temperatures over 100°F regularly, and over 50 or 60 years that dry heat warps wood jambs and loosens hinge screws. A door that rubs at the top or catches at the strike plate usually has a jamb problem, not a slab problem.
- Skipped design pressure calculations on exterior doors. Rialto sits in a high-wind zone under California Building Code. An exterior door replacement without verified design pressure ratings can fail a permit inspection and void the manufacturer’s warranty, a problem we catch and correct before ordering the unit.
- Dust intrusion along the threshold and side jambs. The Santa Ana winds blow fine dust across the Cajon Pass into Rialto every fall. If an entry door doesn’t seal at the base and strike side, that dust ends up inside the house within hours. We install adjustable thresholds and compression weatherstripping on every exterior door.
Pricing for Door Replacement in Rialto, CA
Here are straight numbers for the Rialto market. An interior slab replacement runs $475 to $800. An interior prehung unit with new jamb and casing runs $650 to $1,100. An exterior entry door replacement with a fiberglass Therma-Tru unit, jamb, threshold, and weatherseal runs $1,400 to $2,800 depending on glass options, multi-point locks, and whether we need to reframe the rough opening. A custom exterior door sized for a non-standard opening, or one requiring a design pressure calculation and a permit, adds $150 to $400. We put every line item in writing before work begins. Call (682) 281-2168 and we’ll set up a free estimate at your Rialto home.
We Also Serve Cities Near Rialto
Our crews work throughout the surrounding Inland Empire. Beyond Rialto, we handle Door Replacement projects in Bloomington, San Bernardino, Fontana, and Grand Terrace regularly. If you’re in Rialto or any neighboring city, call (682) 281-2168 and we’ll get you on the schedule with a written estimate.
Serving Rialto, CA - Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Rialto
Yes, in most cases. The City of Rialto requires a building permit for exterior door replacements when the rough opening is altered or when the door is in a required exit path. A like-for-like slab swap in the same opening is usually exempt, but once we reframe the jamb or change the opening width, the city wants a permit. We pull the permit, schedule the inspection, and make sure the design pressure calculation is filed with the plans if wind zone compliance requires it. Call (682) 281-2168 and we’ll tell you upfront whether your specific project needs one.
An interior slab replacement takes two to four hours on site. A full exterior door with jamb replacement and reframing typically takes one day, longer if the rough opening needs significant rework or the stucco patch around the new frame has to cure before we paint. We schedule a single visit for most Rialto jobs and we give you a live arrival time so you’re not waiting around for a four-hour window.
We install and service Therma-Tru, PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux doors. For Rialto’s high-wind zone, Therma-Tru and PGT are the two we recommend most often because their design pressure ratings are readily accepted by the city’s building department. We order directly from the manufacturer, not a middleman, so hardware replacement parts arrive faster for Rialto addresses.
Sometimes, but not always. If the jamb is square, the hinges are tight, and the door is a standard 2’8″ opening, a slab replacement works fine and keeps the cost between $475 and $800. If the jamb is cracked, out of plumb, or has been shimmed repeatedly over the years, a slab-only swap will leave you with a door that sticks and a strike plate that won’t catch. We inspect the jamb before we quote, and we’ll tell you honestly which route makes sense. Call (682) 281-2168 for an exact answer on your specific opening.
A design pressure, or DP, calculation confirms that an exterior door can resist the wind load and wind-borne debris pressure for the specific building location. Rialto sits in a high-wind zone under California Building Code, so exterior doors on new rough openings or exposed elevations often require a documented DP rating to pass inspection. Without it, a city inspector can flag the job and the manufacturer can decline warranty coverage. We determine the required DP early in the scoping process, match the right Therma-Tru or PGT unit to it, and file the calculation with the permit package. Call (682) 281-2168 and we’ll walk you through what your project needs before you commit to anything.
Get a Written Price for Your Rialto Door Replacement
You shouldn’t have to call three contractors and guess which number is real. Our estimate is free, it’s in writing, and it doesn’t change once the jamb comes off and we find what’s behind the trim. We’ll measure the rough opening, check the jamb, confirm the design pressure requirement, and hand you a line-by-line price on the spot. Then our team installs it, photographs the work, and sends you a digital invoice. That’s the whole process. Call (682) 281-2168 to schedule your free estimate in Rialto.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Rialto and the surrounding Inland Empire.