Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Replacement Across Sonoma
Replacing an exterior door in Sonoma usually costs between $1,800 and $5,400 for a standard entry door with installation, and most jobs take one to two days once the door arrives. That price swings on three things: whether your home falls under Sonoma’s historic review path, the condition of the existing jamb and rough opening, and the door itself. We’re the team in the San Francisco Bay Area office who knows the difference between a Plaza-area pre-1940 Craftsman and a newer county-edge home near the Springs, because that difference changes permits, lead times, and final scope. Call (682) 281-2168 and we’ll walk you through what applies to your street before anyone picks up a tool.
Why Juniper Windows & Doors Is Sonoma’s Preferred Door Replacement Company
We’ve been at this since 2001, and the Relay Home Co. family has put more than two decades of installations behind the name. Sonoma homeowners keep calling because the process matches how people actually live here: you book on your phone, you get a live arrival time, and you see before-and-after photos of the work. Sean Mackey oversees the standard we hold every crew to: a written price before anything starts, background-checked uniformed technicians on the job, and a 365-Day Done Right Promise that covers parts and labor for a full year after installation. No vague quotes. No adjusting at the door.
Sonoma’s housing stock runs from 1880s Victorians near the Plaza to 1970s ranchers off Arnold Drive and newer builds east toward Boyes Hot Springs. That spread means door replacement here is rarely a drop-in job. We’ve handled rot at the threshold, out-of-square openings, and historic-board sign-offs that a generic contractor would have missed until week three. Our crew knows when a house needs a design review clearance and when it can pull an over-the-counter permit, and we sequence the work so you’re not staring at a door leaning against the garage wall for a month.
Door Contractors in Sonoma
Door Contractors in Sonoma do more than swap a slab: they scope the opening, check the jamb and sill, handle the permit path, and manage the flashing and weatherproofing that Sonoma’s wet winters and hot summers demand. A typical entry door replacement here runs $1,800 – $5,400, while a full exterior re-door with sidelights or custom sizing can push toward $7,000 – $9,500 depending on material and glass package. When you call Juniper, you get a written line-item quote before work begins, not a round number that grows later.
Scoping the opening
Most Sonoma homes older than 40 years have jambs that have settled, twisted, or rotted at the bottom. We measure the rough opening in three places, check for plumb, and inspect the sill for decay before ordering anything. If the jamb is compromised, the door replacement becomes a door frame repair plus installation, and we price that as one scope from day one.
Permitting and inspection reality
Door replacement in Sonoma can trigger a design review if you’re on a pre-1940 structure near the Plaza. Newer parcels in unincorporated Sonoma County typically clear with a simpler building permit. We handle the paperwork and get the final inspection signed before we consider the job done.
Door Frame Repair in Sonoma
Door Frame Repair in Sonoma comes into play when the jamb is rotted, out of plumb, or split at the hinges, which is common in older Sonoma homes where decades of wet winters have worked on wood at the threshold. Repair costs run $350 – $900 for a standard jamb leg or sill section, and $1,200 – $2,800 when the entire frame needs rebuilding and re-flashing around the opening. We inspect the frame on every Sonoma replacement quote so the repair doesn’t appear as a surprise line item mid-project.
Sill rot and threshold failure
Sonoma’s foggy mornings and winter rains push moisture into the bottom of door frames, especially on west-facing entries and doors without adequate overhangs. When the sill rots, the door sags, the latch stops aligning, and drafts get in. We cut out the bad wood, treat the opening, and rebuild with composite or pressure-treated stock that won’t rot the same way.
Out-of-plumb jambs on older homes
Houses near the Plaza that have settled over 80 or 100 years often have jambs that are an eighth to a half-inch out of square. You can’t just order a stock slab and expect it to fit. We reset the rough opening, shim the jamb back to plumb, and hang the door so it closes on the first push. Patching and painting the trim after the reset is part of the scope we quote.
Trusted Brands We Service in Sonoma
We carry and service Therma-Tru, ViewLux, PGT, and CGI, which means Sonoma homeowners get access to solid-core entry doors, impact-rated glass packages, and modern low-E insulated units without waiting on a distributor to ship from out of state. We keep common jamb stock, weatherstripping, and threshold components on hand for fast turnarounds on repairs across Sonoma, from the Plaza to the Springs. If you’re replacing a Craftsman entry with divided-light details or a mid-century Slab door, we’ll match the style and hardware language rather than forcing a generic insert. You’re never boxed into one brand; the right door for the job is the point.
Common Door Replacement Problems We See in Sonoma Homes
- Historic review surprises on Plaza-area homes. Pre-1940 structures near Sonoma Plaza often need a design review or historic-preservation sign-off before the door can legally change. We’ve seen projects stall because a homeowner ordered the door before the clearance, then had to store it for weeks while paperwork processed. We pull the permit path first so the door shows up when the job is actually ready.
- Out-of-square jambs on settled homes. Older homes off East Napa Street and around the Springs have settled enough that the rough opening is no longer square. A stock slab won’t fit, and forcing it leaves gaps at the latch or head. We repair and re-shim the jamb before hanging the new door.
- Rot at the threshold and bottom jamb. Sonoma’s winter moisture collects at door sills, especially on entries without good roof overhangs. The wood turns soft, the door sags, and you feel a draft at the floor. We rebuild the sill with rot-resistant stock and flash it correctly so water moves away from the opening.
- Flashing and trim detailing that won’t rework. Old stucco or a previous DIY patch around the door can mean the opening needs re-detailing before the new door goes in. We pull the old casing, install proper flashing tape and sill pan, and re-trim to match the house so the door looks like it was always there.
Pricing for Door Replacement in Sonoma, CA
We Also Serve Cities Near Sonoma
Door replacement work takes us across the Sonoma Valley and into surrounding communities: Boyes Hot Springs, Petaluma, Novato, and Cotati. If your home sits in one of these areas, the same pricing, written-quote policy, and 365-Day Done Right Promise applies. You can read more about our broader Door Replacement in Sonoma coverage or schedule a free estimate by phone.
Serving Sonoma, CA - Our Local Coverage Area
We’re based in the Sonoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Sonoma
Do I need a permit to replace an exterior door in Sonoma, CA?
Yes, in most cases. Sonoma’s Building Division treats exterior door replacement as work that affects weatherproofing and structural opening dimensions, so a permit is usually required. If your home is a pre-1940 structure near Sonoma Plaza, you may also need a design review or historic-preservation clearance before the permit is issued. Juniper handles the full permit path and schedules the final inspection as part of the job. Call (682) 281-2168 and we’ll tell you exactly what your address triggers.
How long does a door replacement actually take in Sonoma once we start?
Most entry door replacements take one to two days of on-site work once the door is on hand. The real variable is lead time: stock doors can be ready in a week, while custom sizes, impact-rated glass, or period-matched styles on historic homes can take three to six weeks. If design review applies to your Sonoma property, add two to six weeks for that clearance before the install window opens. We give you a calendar with real dates before you commit.
What changes the price of a door replacement once work begins?
The honest answer: if the jamb is rotted or out of plumb and we discover the damage after pulling the old door, the frame repair becomes part of the scope. That’s why we inspect the frame, check the opening for square, and look at the flashing during the initial quote, so the written price already includes what we can see. If an inspection uncovers a condition hidden inside the wall cavity, we stop, document it with photos, and get your sign-off before proceeding. No silent line items on the final invoice. Call (682) 281-2168 for a quote that anticipates what Sonoma homes typically throw at us.
Can you match my existing door style and hardware on a Sonoma historic home?
Yes. We work on Plaza-area Craftsman, Victorian, and early 1900s homes where a generic fiberglass slab would look wrong and can violate design review standards. We match the door’s stile-and-rail proportions, panel configuration, glass lite pattern, and hardware finish to the original details, then submit the spec for city review if required. The goal is a new door that reads as original to the house. Every job gets a written price and our 365-Day Done Right Promise in writing.
What should I do if my current door sticks, drafts, or won’t latch?
Start with a phone call to (682) 281-2168. In the meantime, check whether the door is binding at the sill, the latch is misaligned with the strike plate, or the hinges are loose. Those symptoms usually point to a settled jamb or a failing sill, not just a door that needs adjustment. A Sonoma door that has been sticking through a wet winter often has hidden rot at the bottom. If the jamb has moved or the sill is soft, putting a new slab in the old opening will not fix it for long. We’ll inspect the frame, give you a written plan, and tell you honestly whether it’s a repair or a full replacement. Call us for a free estimate, and we’ll come out to your Sonoma home and scope it properly.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Sonoma since 2001.










Before
After
Before
After
Before
After