Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Replacement Across South Bay
Door replacement in South Bay usually costs between $700 and $3,800 installed, depending on the door type, material, and whether you need impact-rated glass. Most interior slab swaps run $350 – $700 per opening, while a premium impact-rated entry door with a Therma-Tru or ViewLux setup lands between $2,500 and $4,500. Sean Mackey and the Juniper Windows & Doors team serve South Bay directly from our South FL scheduling office, and we give every homeowner a written price before any work starts. Call (682) 281-2168 for a free in-home measure and a quote that won’t change at the door.
Why Juniper Windows & Doors Is South Bay’s Preferred Door Replacement Company
South Bay sits on the southeast shore of Lake Okeechobee, and that matters more than most homeowners realize when a door starts failing. We’ve walked hundreds of door openings here along East Palm Beach Road, near US 27, and through the Lake Okeechobee Boulevard corridor, and the failure pattern is consistent: lake-breeze humidity, not hurricane wind, is what usually kills the door first. That’s why our Door Replacement team stocks marine-grade hardware, stainless hinges, and sealed jamb materials specifically for this town’s conditions.
Every Juniper job in South Bay gets the same two commitments, in writing: a locked price before the first screw turns, and the 365-Day Done Right Promise, which covers parts and labor for a full year after installation. Our techs are background-checked and uniformed, so when the van pulls up on a home off US 27, you know exactly who’s at the door. The Relay Visibility Guarantee means you get a live arrival time you can track and before-and-after photos of the finished work. Sean Mackey built this operation on one idea: a homeowner should never have to chase a contractor for status updates. And we don’t ask you to.
Interior Door Installation in South Bay
Interior Door Installation in South Bay has a specific urgency because of the humidity that rolls off Lake Okeechobee every afternoon. Hollow-core slabs and MDF doors uptake that moisture through the jamb, swell at the hinge stile, and start dragging or failing to latch within two or three wet seasons. Homeowners in neighborhoods off East Palm Beach Road tell us the same story every July: the bedroom door won’t close, or the bathroom door suddenly needs a shove. That’s not a hinge problem. That’s the slab itself swelling because the material was never meant for year-round moisture load.
Solid-Core Upgrades for the Lake Climate
When we swap a hollow-core for a solid-core door, we replace more than the slab. We reset the jamb, shim it square, and seal the rough opening with marine-grade urethane caulk so the new door doesn’t inherit the same moisture path. In South Bay, this upgrade typically runs $400 – $700 per opening for standard widths, and the result is a door that stays square through wet season. Our techs also swap the cheap zinc-plated hinges for stainless, because in this humidity, standard hinges pit and seize within a few years.
Fire-Rated and Pre-Hung Options
Some South Bay homes, especially older builds from the 1970s and 80s near the lake, have door sizes that aren’t stock. For those, we order pre-hung fire-rated or custom-width units and hang them as a complete assembly. A pre-hung interior door here runs $500 – $800 installed depending on the casing and whether the jamb needs reconstruction. We don’t patch a nasty jamb with shims until it looks okay; we reframe it right so the door swings clean for a decade.
Door Installers in South Bay
Our Door Installers in South Bay are the same crew that handles our impact-rated exterior work, which means they’ve seen what lake humidity does to hardware and thresholds. A door installation here isn’t a drop-in-and-go job. The installer has to account for the way south and west exposures bake in the afternoon sun, the way the lake breeze carries moisture through the wall assembly, and the way original builder materials, like mill-finish aluminum thresholds and non-stainless screws, corrode fast and stain the pavers below the sill.
Entry Door Resets and Full Replacements
A full entry door replacement in South Bay usually includes pulling the old jamb, inspecting the rough opening for rot or termite damage, flashing the head with hot-dip-galvanized metal, and setting the new unit on a composite threshold. This job runs $1,800 – $4,500 in South Bay depending on whether you choose a fiberglass Therma-Tru, a steel door with impact glass, or a ViewLux configuration. We write the price before we order materials; there’s no surprise line item for dry rot unless we find it and show you the photos first.
Interior Slab Swaps on Existing Jambs
Sometimes the jamb is still square and the problem is just the slab. In those cases, we can swap an interior door onto the existing jamb for $350 – $500 per opening, cutting hinge mortises in the field and matching the door stop to the new leaf. That said, in South Bay, a jamb that has absorbed lake humidity for a decade usually isn’t worth saving. We’ll tell you straight if a slab swap is a waste of money and the full reset is the right call.
Trusted Brands We Service in South Bay
We install and service Therma-Tru, ViewLux, and PGT doors across South Bay, and we carry the local hardware and weatherseal parts these brands need to survive in this climate. A Therma-Tru fiberglass door works well here because the slab doesn’t warp or swell the way a wood door does, and the factory finish holds up against the south exposure sun. ViewLux gives South Bay homeowners a modern look with strong sightlines and glass packages that are built for Florida’s wind zone. PGT is the gold standard for impact-rated entry doors, and we match design pressure ratings to the exact opening, never above +/-100 PSF. When a South Bay customer needs a part or a warranty visit, our techs have the right stock on the truck, which keeps turnarounds fast.
Common Door Replacement Problems We See in South Bay Homes
- Swollen MDF and hollow-core interior slabs. Lake-breeze humidity gets into the jamb, the slab swells at the hinge stile, and the door drags or refuses to latch starting every May. We replace these with solid-core doors and seal the rough opening so the problem doesn’t come back next wet season.
- Rusted bottom rails on steel entry doors. South and west exposures plus year-round humidity keep the threshold damp, and the factory paint fails within a few years. We reset these openings with fiberglass Therma-Tru slabs and stainless hardware.
- Corroded thresholds and seized hinges. Original builder doors here often use mill-finish aluminum thresholds and plain zinc-plated screws. The salt-laden lake breeze corrodes both fast, staining stucco and pavers below the door. We spec composite thresholds and hot-dip-galvanized or stainless fasteners on every replacement.
- Racked jambs from shifting slab foundations. South Bay flat ground expands and contracts with seasonal moisture, and older homes settle. A door that latched fine in January may bind by August. We reset jambs square and shim with composite material instead of wood so the correction lasts.
Pricing for Door Replacement in South Bay, FL
Here are the real numbers for this market. An interior slab swap on an existing jamb runs $350 – $500 per opening. A pre-hung interior door with solid-core construction runs $500 – $800. A fiberglass entry door without impact glass starts around $1,800 and tops out around $3,200. An impact-rated entry door, which most insurance carriers want, runs $2,500 – $4,500 in South Bay. The gap between standard and impact-rated comes down to glass lamination, heavier frame construction, and the extra flashing and anchoring a wind-rated unit requires. We give you a written line-item quote at the free in-home measure, so you know the number before you decide. Call (682) 281-2168 to set that up.
What Door Replacement Costs in South Bay
South Bay door pricing tracks the same range as Belle Glade and Pahokee, but the materials spec is where it differs. A standard builder-grade steel entry door may look like a deal at $900, but if it lacks a composite threshold and stainless hardware, you’ll be replacing the bottom rail in three to five years. That’s the cheap spec that costs more within a decade. For a proper South Bay installation, plan on $1,800 – $3,000 for a standard fiberglass entry, $2,500 – $4,500 for an impact-rated entry, and $350 – $800 per interior opening. Whole-home packages across five or six openings run $8,000 – $15,000 depending on how many units need impact glass. Floor height matters too: a second-story front entry in a raised home off Lake Okeechobee Boulevard needs more anchoring and costs a few hundred more than a ground-level slab opening. The free measure and written quote is how we keep the price honest.
Florida Pays You Back
South Bay homeowners have access to several incentive programs that cut the real cost of a door replacement. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and impact-resistant doors count toward that application. Florida also exempts impact-rated windows and doors from sales tax, which saves roughly 6 – 7% at the register. At the federal level, the 25C energy credit covers 30% of the product cost, up to $600 per year, on qualifying energy-efficient exterior doors. And after you install an impact-rated door, many carriers will re-rate your windstorm premium, often cutting that portion by about 25% once a wind-mitigation inspection that costs $75 – $150 comes back clean. We don’t quote the insurance savings because your carrier sets the final number, but we’ll provide the documentation you need: product approval numbers, design pressure ratings matched to your openings, and a clean invoice showing the work.
We Also Serve Cities Near South Bay
Juniper Windows & Doors covers Door Replacement in South Bay plus the surrounding lake communities. We regularly run jobs in Belle Glade and Pahokee, where the same lake-breeze humidity eats doors the same way, and we serve Wellington and Royal Palm Beach for homeowners whose door problems are less about humidity and more about sun exposure and foot traffic. If you’re anywhere in the Glades or the western communities, call (682) 281-2168 and we’ll schedule the same written quote and fast install.
Serving South Bay, FL - Our Local Coverage Area
We’re based in the South Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in South Bay
Lake-breeze humidity gets into the rough opening, the slab absorbs moisture, and the hinge stile swells until the door drags or won’t latch. This is the most common interior door failure we see in South Bay, and the fix is a solid-core door with a properly sealed jamb, not a door plane. Call (682) 281-2168 and we’ll quote the swap for $350 – $500 per opening.
For exterior doors, yes, you should strongly consider impact-rated units. South Bay sits in a Florida wind zone that still sees strong wind and debris from storms rolling off Lake Okeechobee, and insurance carriers increasingly require impact-resistant exterior doors for premium credits. Interior doors never need impact ratings. We’ll show you the design pressure ratings for your specific opening, never exceeding +/-100 PSF, at the free measure.
A coastal-spec door has stainless steel hinges, hot-dip-galvanized flashing, a composite threshold, marine-grade urethane seals, and often impact-rated glass. An inland-spec door uses zinc-plated hinges, mill-finish aluminum thresholds, and standard seals, every one of which fails faster in South Bay’s year-round lake humidity. The coastal spec costs more up front,$200 – $600 on an entry door, but the inland spec often costs you a full replacement within five to seven years.
Sometimes. If the existing jamb is square and structurally sound, we can hang a Therma-Tru solid-core or ViewLux interior door onto it for $350 – $500 per opening. But in South Bay, a jamb that has absorbed lake humidity for years is usually warped at the strike side or softened at the sill. At the free measure, we’ll tell you whether a slab swap makes sense or a full jamb replacement is the smarter money.
Usually yes, but the exact discount depends on your carrier and your current wind-mitigation inspection report. After a wind-mitigation inspection, most carriers re-rate the windstorm portion of the premium, and homeowners average around 25% off that portion with clean ratings. You’ll need product approval documentation and design pressure ratings, both of which we include in the written quote and the final digital invoice. Call (682) 281-2168 to schedule the free measure and get exact pricing for your openings.
Call Juniper Windows & Doors for Door Replacement in South Bay
When a door sticks, rusts, or won’t latch in South Bay, it’s usually the lake humidity at work, and the fix is a door built for exactly that. Our team, led by Sean Mackey, gives you a written price before any work starts, a live arrival time through The Relay Visibility Guarantee, and a 365-Day Done Right Promise that covers parts and labor for a full year. We answer the phone 24/7 with a live person, not a voicemail maze. Call (682) 281-2168 now and schedule your free in-home measure. We’ll show up on time, measure your openings, and hand you a quote in writing. No surprises, no adjustment at the door.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving South Bay with the Relay Home Co. family since 2001.