Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Replacement Across Westmont
Door replacement in Westmont runs $450 – $2,800 for a standard single entry door installed, and $1,800 – $5,500 for a sliding patio or French door setup, depending on size, material, and whether the rough opening needs rebuilding. Most interior door replacements run $250 – $900 per door including labor and hardware. We’re Juniper Windows & Doors, and we’ve handled enough Westmont jobs to know that the real cost driver is rarely the door itself, it’s what we find when we pull the old one out. Call (682) 281-2168 for a written, line-item quote before anything starts.
Westmont homes run older than most Angelenos expect. A lot of the original 1950s and 60s frames are racked, the jambs are soft at the bottom from sprinkler overspray, and the slabs themselves have been painted so many times they no longer close square. That’s why we scope every Westmont door job in person, take measurements to the rough opening, and put the number in writing. You’ll know the exact cost, the real timeline, and which permits the county requires, before you commit to anything.
Why Juniper Windows & Doors Is Westmont’s Preferred Door Replacement Company
We stock product lines built for Southern California exposure, PGT, CGI, CWS, and ES Windows among them, and our installers know which units actually meet Los Angeles County’s design pressure requirements for this corridor. That matters more in Westmont than homeowners realize. Your local Home Depot will happily sell you a door that fails county inspection on the first call because it was never rated for the wind zone. We won’t. We order to the spec, verify the glazing, and handle the paperwork with LA County Building and Safety directly.
Sean Mackey leads our team, and the standard he set is simple: written pricing before the first screw turns, background-checked uniformed technicians on site, and a 365-Day Done Right Promise on every installation. If the work isn’t right, we make it right, for a full year, parts and labor, in writing. Westmont homeowners tell us the difference shows up in the small stuff: a live arrival time they can track, before-and-after photos of the work, and a digital invoice they can pay from their phone.
Our crews serve Westmont regularly, coordinated from the Los Angeles office, and we know the streets: the blocks off West 104th, the pockets around Westmont Park, the 90047 and 90044 zip codes. That local presence means we’re not mapping our way to your house for the first time. We’re already familiar with the housing stock, the county permit flow, and the door failures this neighborhood sees season after season.
Door Frame Repair in Westmont
Door frame repair in Westmont usually means rebuilding a rotted or rusted jamb and casing, squaring the rough opening, and remounting the slab so it actually closes and locks, often after years of the South Bay air and irrigation overspray working on the wood. We see this constantly in the older homes off Vermont and Normandie. The cost typically runs $350 – $1,200 depending on how much of the frame needs replacement and whether we’re reusing the existing slab or hanging a new one.
Rotted and Corroded Jambs
In Westmont’s coastal-adjacent climate, bottom sections of exterior jambs wick moisture from sprinkler overspray and morning marine air. We cut out the rotted section, replace it with treated or composite material, and prime and paint the repair so it doesn’t telegraph through the finish. Skipping this and hanging a door on a soft jamb just transfers the problem to the new slab within a season.
Squaring a Racked Rough Opening
Old slabs settle, and Westmont’s 60-year-old rough openings are rarely square anymore. We shim, plane, and rebuild as needed so the new door isn’t fighting the frame. A door that binds at the top corner or swings open on its own is almost always a rough opening problem, not a hinge problem.
Interior Door Replacement in Westmont
Interior door replacement in Westmont covers everything from swapping hollow-core bedroom doors for solid-core slabs, to replacing closet and bathroom doors where years of humidity have warped the panels beyond adjustment. The typical range is $250 – $900 per door, with the spread driven by slab material, hardware, and whether the casing needs resetting. Most Westmont homes were built with cheap hollow-core units that rattle every time the furnace kicks on. Replacing them changes how the whole house sounds and feels.
Solid-Core Upgrades for Older Homes
Many Westmont homes still have the original hollow-core doors from the tract build-out. A solid-core replacement adds mass and noticeably better sound isolation between bedrooms and living areas. It’s one of the least expensive ways to make an older home feel more solid, and we can match the existing casing profile so it looks original.
Closet and Utility Doors
Bifold and pocket doors in Westmont closets are another common replacement. The tracks wear out, the pins bend, and homeowners get tired of fighting a door that jumps its rail every third time. We replace the slab and hardware, and we can convert a tired bifold to a bypass setup if the opening allows.
Trusted Brands We Service in Westmont
We supply and install PGT, CGI, CWS, and ES Windows products, among others, and we keep the common hardware and glazing parts for these lines accessible for Westmont service calls. That means if your PGT sliding door needs a roller assembly or your CGI hinge door has a binding strike plate, we’re not waiting on a backordered part from a distributor across the country. We know these brands’ tolerances and warranty paperwork, and we’ve put plenty of them into Westmont homes where the sun beats on south-facing openings all afternoon. If you already have a Therma-Tru or ViewLux unit that’s failing, we service those too.
Common Door Replacement Problems We See in Westmont Homes
- Skipped county permits treated as “just a door swap.” Westmont has no city building office, so door replacement permits go through Los Angeles County Building and Safety. Homeowners who skip it often find the missing permit flagged at resale or after an insurance claim.
- Doors hung on rotted or rusted existing jambs. We regularly pull doors in Westmont where the bottom six inches of the jamb is gone, and someone just hung a new slab on top anyway. The new door binds, leaks air, and fails within a season because the rough opening was never addressed.
- Big-box doors ordered without checking design pressure. Westmont sits in a wind exposure zone that requires specific design pressure ratings and sometimes impact-rated glazing. Standard off-the-shelf doors frequently don’t meet the county’s documentation requirements, and the homeowner finds out at inspection.
- Slider panels that jump the track. The original aluminum sliders in Westmont’s 1960s and 70s homes wear out at the rollers. Once the panel rides on the frame instead of the roller, it chews the track and the whole unit needs replacement, not just a wheel swap.
Pricing for Door Replacement in Westmont, CA
Here’s what we quote in Westmont, in writing, before work starts:
- Single entry door, fiberglass or steel, installed: $450 – $2,800
- Sliding patio door, full replacement: $1,800 – $5,500
- French or double-door replacement: $2,200 – $6,000
- Door frame or jamb repair: $350 – $1,200
- Interior door replacement per unit: $250 – $900
What moves the number is the rough opening. If the framing is sound, the job goes fast and the price stays at the low end. If we open the wall and find rot, rust, or a racked header, that work gets added to the written quote before we proceed, never after the fact without your approval. We also handle the county permit and inspection paperwork so your door replacement passes clean. Call (682) 281-2168 and we’ll scope your Westmont job and put the full number in writing, free.
We Also Serve Cities Near Westmont
Beyond our regular work in Westmont, our Door Replacement crews serve homeowners in Los Angeles, San Diego, San Jose, and San Francisco. If you’re outside Westmont proper but in one of those markets, the same written pricing, the same 365-Day Done Right Promise, and the same product lines apply.
Serving Westmont, CA - Our Local Coverage Area
We’re based in the Westmont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Westmont
Yes, in most cases. Westmont has no city building department, so permits for door replacement go through Los Angeles County Building and Safety, not a municipality. Swapping a door in the same rough opening without structural changes sometimes falls under a simpler path, but any opening resize, header work, or exterior door replacement typically requires a permit and at least one inspection. We handle the permit application, plan check scheduling, and inspection coordination as part of the job. Call (682) 281-2168 and we’ll tell you exactly what your specific project triggers.
A standard single-door replacement in Westmont takes one day on site, including removal, rough opening verification, installation, and trim. A sliding patio door or French door runs one to two days. If the rough opening needs structural repair, add a day and a separate inspection visit. The county permit plan check can add a week or two before we start, which is why we submit early. We’ll give you the full calendar in writing at quote.
The price changes when we open the wall and find conditions we couldn’t see at quote: rotted sub-sill, rusted anchor hardware, a racked rough opening, or water damage behind the casing. We document it, show you photos, and put the added scope on a written change order before doing any of it. We never proceed with unapproved charges. That’s the Relay Standard, and it applies to every Westmont job.
For exterior doors on west and south-facing exposures, yes. Westmont sits in a wind zone where Los Angeles County enforces design pressure documentation, and impact-rated glass, built to resist wind-borne debris without shattering, is required on some openings and smart on others. We’ll spec the exact glazing your door needs so it passes inspection the first time and holds up to the afternoon sun. Call (682) 281-2168 and we’ll check your opening against the county requirements.
We install PGT, CGI, CWS, and ES Windows doors, plus Therma-Tru and ViewLux units, and we service all of those brands’ hardware and glazing. We stock common parts for the lines we install so Westmont customers aren’t waiting weeks on a roller or strike plate. If you have a failing door from one of those brands, we can usually repair or replace it faster than a general contractor who has to source everything one-off.
Ready to get your Westmont door replacement priced? Call (682) 281-2168 for a free, written estimate. Sean Mackey and the Juniper team will scope the job, explain exactly what the county requires, and put every number in writing before anything starts.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Westmont since the company’s founding in 2001.










Before
After
Before
After
Before
After