Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Pompano Beach
Window installation in Pompano Beach carries a set of rules most Florida contractors never mention. You’re in the HVHZ, the High Velocity Hurricane Zone, which means your replacement windows need Miami-Dade NOA or Florida Product Approval paperwork, not just an “impact” sticker. And the salt air east of Federal Highway eats standard aluminum frames in three to five seasons. We know which spec belongs in your house because we work Pompano Beach week in and week out, from the canal-front streets near the Air Park to the newer subdivisions west of Florida’s Turnpike. Call (682) 281-2168 and we’ll give you a written price before any work starts.
Why Juniper Windows & Doors Is Pompano Beach’s Preferred Window Installation Company
Customers in Pompano Beach keep calling us back because we treat a window job like what it actually is: a structural decision that affects your insurance, your power bill, and your house’s survival in a storm. Every project gets the Relay Standard: a live arrival time you can track, before-and-after photos, a digital invoice you can pay from a link, and a written price locked before the first screw turns. Sean Mackey leads our install crews, and he holds every Pompano Beach job to the 365-Day Done Right Promise. If a window isn’t right, we make it right, parts and labor, in writing, for a full year.
We’re part of the Relay Home Co. family, founded in 2001, and we carry eight product lines so a Pompano Beach homeowner never has to settle for a window that’s close enough. PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That matters when you need a specific Miami-Dade NOA number for your exposure category, or a custom bay window that preserves a canal view without turning your living room into an oven. Dispatch and scheduling run from our Miami South FL office, but the crews serving Pompano Beach live here and know the local building department’s expectations. Calls are answered by a live person 24/7, not a voicemail maze.
Picture Window in Pompano Beach
A picture window in Pompano Beach is a fixed pane of glass designed to frame a view, and that view is usually why you bought the house: a canal, a stretch of Intracoastal, a line of royal palms along a street in Harbor Village. On this page, when we say Picture Window, we mean a true fixed unit, not a venting window disguised as one. The job here typically involves removing the old frame to the rough opening, squaring the jambs, installing a new fixed sash with foam-sealed perimeter, and trimming out the interior. For a Pompano Beach home east of Federal Highway, you’ll want impact-rated glass with a low-E coating and a stainless steel anchor package, not the galvanized hardware that rusts through in a few years.
View Preservation and Structural Reinforcement
Fixed windows have no moving parts to leak, which makes them the most durable option for ocean-facing Pompano Beach walls. We set the glass at the correct design pressure rating for your exposure category and add structural mullions when the opening gets wide. A typical picture window in Pompano Beach runs $800 to $1,500 installed, with large or custom openings running $2,500 to $5,000. The coastal-spec version costs more because the frame gets a marine-grade finish and the anchors are stainless, not galvanized.
When a Fixed Window Makes Sense
You want a picture window when airflow isn’t the point and the view is. A north-facing living room in Garden Isles, a master bedroom overlooking a canal, a dining room that gets the seabreeze through adjacent casements: the fixed pane does the heavy lifting for light and sightline while venting windows handle the air. Pair a picture window with side casements or awnings and you get cross-ventilation without blocking the view with mullions.
Bay Window Installation in Pompano Beach
Bay window installation in Pompano Beach projects a room outward past the exterior wall, creating a three-sided glass alcove that catches light from three directions. The typical bay here uses a fixed picture center flanked by venting casements or double hungs at 30 to 45 degrees. In Pompano Beach, the seat board and roof structure under the bay take the brunt of salt spray and wind-driven rain, so the flashing and sealant spec matters as much as the glass. A bay window installation in Pompano Beach runs $2,500 to $5,000 for most openings, with larger custom bays pushing higher. That’s the coastal-spec price with stainless anchors, marine-grade sealant, and a properly flashed roof cap.
Waterproofing the Projection
A bay window’s weakest points are the joints where the projection meets the house wall and the roof cap that sheds rain. In Pompano Beach, those joints get hammered by onshore wind and salt mist. We seal every jamb and sash perimeter with marine-grade sealant, flash the roof cap, and use stainless fasteners throughout. Skip the stainless on a beachside bay and you’ll see rust staining the interior sill within three or four seasons.
Interior Light Without Sacrificing the View
A bay window changes the way a room feels. The angle catches morning light from the east and afternoon light from the west, and the bench seat becomes the most-used spot in the house. For Pompano Beach canal homes, we custom-build the bay to keep the water view dead-center while the angled sides pull in air when the breeze swings. The 365-Day Done Right Promise covers the full installation, parts and labor, in writing.
Trusted Brands We Service in Pompano Beach
We work with PGT, CGI, and CWS most often in Pompano Beach because their Miami-Dade NOA paperwork is consistent and their laminated glass interlayers hold up to wind-borne debris. When a Pompano Beach homeowner needs a specific Florida Product Approval number for their exposure category, we can pull it from the brand’s compliance library and match the design pressure to the opening. That’s the difference between passing a Pompano Beach building inspection clean and failing on paperwork. We keep these lines in our regular rotation and order direct, so custom fabrication runs four to six weeks, and once your units arrive, installation can be done in as fast as a single day.
Common Window Installation Problems We See in Pompano Beach Homes
- Salt-air corrosion east of Federal Highway: Standard aluminum frames pit white and mild-steel anchors rust-jack within three to five seasons. We’ve pulled units whose jamb anchors were rusted clean through, and the fix is always the same: stainless hardware and marine-grade frame finishes.
- Non-HVHZ-spec windows without Miami-Dade NOA or Florida Product Approval paperwork: These fail Pompano Beach inspections and tank wind mitigation credits at insurance renewal. A generic “impact” label doesn’t satisfy the building department.
- Poorly sealed jambs and sash perimeters on the ocean side: Wind-driven rain and salt mist infiltrate the insulated glass unit, fog the cavity, and kill the low-E coating. Once the glass fogs, the unit is done.
- Rusted roof caps and seat boards on bay windows: The flashing joints on a beachside bay take constant salt spray. Without marine-grade sealant and a properly flashed cap, the projection leaks into the wall cavity and the sill rots.
Pricing for Window Installation in Pompano Beach, FL
Impact windows in Pompano Beach generally run $800 to $1,500 per window installed. Impact single-hung units land between $900 and $1,800. Large or custom openings like picture windows and bay windows run $2,500 to $5,000. Whole-home packages for a typical Pompano Beach single-family house fall between $8,000 and $25,000 and up. What moves the price: opening count, wind zone and exposure category, floor height on a waterfront lot, and frame material. A beachside spec with stainless anchors, marine-grade finish, and a higher design pressure rating costs more than the same window a mile inland, and for good reason. We give every Pompano Beach homeowner a free in-home measure and a written quote before any work starts. Call (682) 281-2168 to schedule yours.
What Window Installation Costs in Pompano Beach
Let’s put the numbers side by side so you can see where the coastal premium shows up. A standard impact single-hung in Pompano Beach runs $900 to $1,800 installed, while a fixed picture window runs $800 to $1,500. A bay window runs $2,500 to $5,000 because of the extra structure, flashing, and seat board. Whole-home packages start around $8,000 and climb past $25,000 for larger waterfront houses. The coastal-spec version of any of these jobs includes stainless steel anchors instead of galvanized, a marine-grade frame finish, and sealant rated for constant salt spray. The inland-spec version is cheaper on the front end and costs more within a decade, because galvanized anchors rust through and the frames pit white. We’ll give you a written line-item quote so you can see exactly where the dollars go.
Florida Pays You Back
Pompano Beach homeowners can stack several incentives when they install impact-rated windows. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida also grants a sales-tax exemption on impact-resistant windows and doors. On the federal side, the 25C energy credit covers 30% of the product cost, up to $600 per year on qualifying units. And after a wind mitigation inspection, which typically runs $75 to $150, many Pompano Beach insurance carriers apply a windstorm-premium credit averaging around 25% on the windstorm portion of the premium. We don’t set those numbers and we don’t guarantee a specific credit: your carrier and the program administrators have the final say. What we do is install to the spec that qualifies.
We Also Serve Cities Near Pompano Beach
Beyond Pompano Beach, our crews cover Window Installation work across Coconut Creek, Margate, Deerfield Beach, and Fort Lauderdale. Each city has its own inspection quirks and exposure categories, and we carry the product approvals and documentation to keep the job moving. If you’re a few miles from Pompano Beach, we can still get you a written quote and an install date. Call (682) 281-2168 for a free measure, or explore our Window Installation in Pompano Beach page for local specifics.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Pompano Beach
Yes. Pompano Beach sits inside the High Velocity Hurricane Zone, so replacement windows need Miami-Dade NOA or Florida Product Approval documentation with a design pressure rating matched to your building’s exposure category. A generic “impact” label without the paperwork will fail inspection and trigger rejected wind mitigation credits at insurance renewal. Call (682) 281-2168 and we’ll match your opening to the correct approval.
The onshore breeze off the Atlantic pushes salt mist over everything east of Federal Highway, and salt water corrodes standard aluminum frames and mild-steel anchors within three to five seasons. That’s why the beachside spec matters: stainless anchors, marine-grade frame finishes, and sealed jambs. We’ll quote you the right spec for your specific address, not a generic Pompano Beach price.
Many Pompano Beach carriers apply a windstorm-premium credit averaging around 25% on the windstorm portion after a wind mitigation inspection, which runs $75 to $150. The credit only applies if the windows carry the proper Miami-Dade NOA or Florida Product Approval paperwork and the inspector verifies the installation. We install to that spec so you have a clean file.
The coastal-spec uses stainless steel anchors instead of galvanized, a marine-grade frame finish, and sealant rated for constant salt spray, and it carries a higher design pressure for beachfront exposure categories. The inland-spec saves money on hardware and finish but costs more within a decade when galvanized anchors rust through. We quote both so you can make the call with your eyes open.
We set the glass at the correct design pressure for the opening and build the frame around the sightline, not the other way. For a bay window, the fixed picture center stays dead on the water while angled side casements handle ventilation. For a picture window, we minimize mullions and keep the glass plane clean. The view stays; the storm rating comes with it. Call (682) 281-2168 for a free in-home measure and written quote.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Pompano Beach and the surrounding Florida coast.










Before
After
Before
After
Before
After