Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Replacement Across Morgan Hill
Replacing an exterior door in Morgan Hill typically runs $1,400 to $4,800 for a standard prehung fiberglass or steel door with installation, while a full entry system with sidelights can reach $7,500. Most jobs wrap up in one day once the door arrives. We schedule a written, line-item quote before anything is ordered, so you’ll know the exact number before we touch the opening. If you’re weighing a door replacement in Morgan Hill, call (682) 281-2168 and we’ll walk you through options, timing, and a price that holds.
Morgan Hill’s mix of 1980s and 1990s tract homes, custom builds in the east hills, and newer subdivisions near Butterfield Boulevard means we see a wide range of door openings. Some are standard 36-inch slabs; others are custom width or double-door configurations that need a little more planning. Our team loads out from the Bay Area office and schedules Morgan Hill jobs in focused blocks, so you’re not stuck waiting through a four-hour window. You’ll get a live arrival time the morning of the install, same as a rideshare.
Why Juniper Windows & Doors Is Morgan Hill’s Preferred Door Replacement Company
Morgan Hill homeowners tell us the same thing: they want a door that seals tight, locks securely, and doesn’t sag six months after install. We’ve built our local reputation on that exact ask. Sean Mackey leads our crew, and the standard he sets is simple: if the door isn’t hung square, flashed right, and closing solid at the end of the day, it doesn’t count as done. That’s the 365-Day Done Right Promise on every installation, covering parts and labor for a full year after the job.
We answer our own phone 24/7, not a call center. When you call about a door that’s binding or a frame that’s pulling away from rough opening, the person you talk to can actually do something about it. Our techs are background-checked and uniformed, so the person walking up your driveway on East Dunne Avenue or in Paradise Valley is who we said it would be. We also send before-and-after photos of the work, and your invoice arrives digitally with a payment link. No paper chasing.
Response time to Morgan Hill runs same-week for most standard replacements once materials are confirmed. If you’re off 101 near Cochrane Road or deeper into the residential streets west of Monterey Road, we coordinate the visit and price in writing before the first screw turns. That’s been our operating rule since Juniper began in 2001 as part of the Relay Home Co. family, and it hasn’t changed.
Door Contractors in Morgan Hill
Door contractors in Morgan Hill handle the full replacement: removing the old slab and frame, checking the rough opening for rot or seismic issues, installing a new prehung unit level and plumb, flashing the sill and jambs, and trimming both sides. It’s detail work. In Morgan Hill, the two things that separate a good door install from a call-back are how the sill flashing sheds water and whether the frame is anchored to resist racking. Homeowners typically need a contractor when the door sticks, the frame shows rot, or an existing slab is so warped that weatherstripping gaps leak air.
A full replacement with a mid-range fiberglass door in Morgan Hill runs $1,600 to $3,200. Steel runs slightly less; wood-clad and custom finishes run more. The labor portion is roughly $600 to $1,100 depending on whether the casing and trim come out clean or need reconstruction. We write every quote with these line items separated, so you see what you’re paying for before you sign anything.
Exterior Door Installations
We hang prehung fiberglass and steel entry doors most often in Morgan Hill. These handle the summer heat off the Santa Cruz Mountains and the damp winter months without swelling the way solid wood does. A fiberglass door with a foam core also cuts thermal transfer at the entry, which matters when overnight lows drop into the 30s around Christmas and New Year’s.
Entry Door Upgrades
If the frame is sound but the door itself is tired, we can replace the slab only, add new weatherstripping, and upgrade the hardware and deadbolt prep. This works well for Morgan Hill homes where the original jamb is still tight and the opening is a standard size. Slab-only replacement runs $500 to $1,200 installed, depending on door material and glass package.
Door Frame Repair in Morgan Hill
Door frame repair in Morgan Hill comes up more often than full replacement, especially on homes built before 2000. The frame, jamb, and threshold are the structural surround that holds the door in place and seals it against weather. When a jamb cracks at the hinge screws, or the sill plate rots from repeated wet-season saturation, the door sags and the deadbolt stops aligning. Repair involves removing the damaged section, potentially sistering in new framing stock, re-hanging the door, and re-flashing the vulnerable spots.
Expect $300 to $900 for most frame repairs in Morgan Hill, depending on how far the damage goes. If the rot reaches into the subfloor or the king studs, the price climbs, but we’ll always make the “repair versus replace” call with photos and a straight answer. You’ll never get upsold into a new door when a jamb repair is the right fix.
Jamb and Sill Repairs
The sill takes the most abuse in Morgan Hill, particularly on west-facing entries that catch winter storm lines moving in off the Pacific. We replace rotted sill plates, slope the new sill for positive drainage, and install pan flashing that extends past the exterior face. It’s the same approach we use on full replacements, and it stops the slow water damage that quietly eats subfloor for years.
Rotted Frame Reconstruction
When water has been standing at the base of a door frame for years, the damage often extends into the rough opening. We remove the rot, treat the remaining wood, and rebuild the opening with kiln-dried stock before resetting the frame. This is common enough in Morgan Hill’s clay-heavy soils, where seasonal moisture shifts cause tiny cracks in exterior grade that let water run toward the door exactly where you don’t want it.
Trusted Brands We Service in Morgan Hill
We install and service PGT, CGI, and CWS doors throughout Morgan Hill. What that means for you is direct familiarity with the hinge prep, threshold geometry, and hardware spec for each line, plus faster turnaround on replacement parts than going through a big-box order desk. If you’ve got a PGT door that’s off-plumb or a CWS frame that needs new weather stripping, we know exactly what to order and how to make it seal again. For openings that need impact-rated glazing, PGT and CGI both build units that meet Miami-Dade and California code, and they’re worth a serious look for west-facing entries or any door with glass.
Common Door Replacement Problems We See in Morgan Hill Homes
- Water intrusion at the sill during winter storms. Morgan Hill’s clay-heavy soils shift with seasonal moisture, and that movement cracks the grade and walkway concrete around door openings. Water follows those cracks and attacks the sill plate, leading to rot that homeowners rarely see until the door won’t close.
- Frames that bind after seismic activity. Moderate earthquakes and even heavy truck traffic on Monterey Road can move a poorly anchored door frame. We see doors that latched fine for years suddenly sticking at the top reveal because the frame lost its grip on the rough opening.
- Warped slabs from direct sun exposure. South-facing doors in Morgan Hill take intense afternoon heat, especially in summer. Solid wood slabs and even some steel doors will swell or bow if the finish breaks down, and the result is a door that fights you every time you open it.
- Drafty entries with weak thermal seals. Older Morgan Hill homes often have hollow steel doors with compressed weatherstripping. The door itself isn’t failed, but it’s leaking conditioned air year-round. We quote slab-only replacements with tight Q-Lon weatherstripping and a bottom sweep that actually seals against the new threshold.
Pricing for Door Replacement in Morgan Hill, CA
Here’s where the money goes on a typical Morgan Hill door project. A standard single entry door with a fiberglass slab and basic trim runs $1,400 to $2,600. Add a steel door and you’re looking at $1,100 to $2,200. Go up to a higher-end fiberglass with glass inserts, decorative glass, or a custom color, and plan on $2,600 to $4,800. Double doors or a door with sidelights push into the $4,000 to $7,500 range. The labor portion stays relatively flat; most of the swing comes from the door itself, glass package, and any frame reconstruction. In the Paradise Valley neighborhood off East Dunne Avenue, we replaced a weathered Therma-Tru entry door that had a cracked jamb and water staining on the subfloor. The full job, including new flashing, seismic strapping, and a laminated glass insert, landed at $3,800. That’s a solid benchmark for a mid-to-upper level replacement in Morgan Hill. Call (682) 281-2168 for a free estimate, and we’ll price your exact opening, written, before you commit.
What changes a price once work begins? Rotted framing behind the jamb. Out-of-square rough openings. Non-standard door sizes that require a custom order. We identify these during the quote visit, not after the tear-out, so the number we put in writing is the number you pay. Fixed pricing is how we work.
We Also Serve Cities Near Morgan Hill
Beyond our Door Replacement in Morgan Hill service area, our crews regularly handle door projects in San Martin, Gilroy, Los Gatos, and Campbell. If you’re just over the line in one of these neighboring cities, or you’re planning a move that direction, the same Door Replacement team, pricing model, and warranty apply. Give us a call and we’ll get your opening measured and quoted.
Serving Morgan Hill, CA - Our Local Coverage Area
We’re based in the Morgan Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Morgan Hill
For a like-for-like door replacement where the rough opening does not change, Morgan Hill building officials generally do not require a permit. If you’re enlarging the opening, adding sidelights, or altering framing, a permit is likely needed. We’ll tell you which applies to your project during the estimate, and we pull permits when the scope requires them.
A standard single-door replacement takes one full day. Custom orders add lead time, usually two to four weeks depending on the manufacturer and glass package. We’ll give you a firm calendar before ordering, and the live arrival time on install day means you’re not sitting around waiting. Call (682) 281-2168 to get your project on the schedule.
Plan on $1,400 to $4,800 for most single-door replacements, with double doors and sidelight systems running $4,000 to $7,500. Slab-only swaps run $500 to $1,200. Your exact price depends on door material, glass package, and whether the frame needs reconstruction, and we lock that number in writing before any work starts.
In most Morgan Hill homes, yes. If the jamb is cracked but the framing behind it is solid, we’ll repair the section, re-hang the door, and re-flash the vulnerable spots for $300 to $900. If rot has reached the rough opening or the frame is so far out of square that shimming won’t correct it, replacement is the honest answer. We’ll show you photos either way before quoting.
Yes. We install impact-rated doors from PGT and CGI with laminated glass interlayers built to resist breakage from wind-borne debris and forced entry. They’re popular in Morgan Hill not just for wind, but for security and potential insurance discounts. We’ll walk you through the spec and the actual price difference during your free estimate. Call (682) 281-2168 to ask about availability for your opening.
Morgan Hill sits in a moderate seismic zone, and that changes how a door should be installed. Standard door replacement specs from the Bay Area often skip seismic detailing, but Morgan Hill inspectors expect exterior door frames anchored with seismic straps similar to what you see on water heaters in new or heavily remodeled openings. We include that strapping on our exterior door installs as standard. It’s a small incremental cost, maybe $60 to $140 in materials and labor, and it keeps a door from racking and binding after a moderate shake. If you’ve got a door that suddenly won’t latch after an earthquake or after heavy truck traffic on Monterey Road, that missing strap is often the reason.
Written by Sean Mackey, Owner at Juniper Windows & Doors, serving Morgan Hill since 2001.